Procedure 3-4 (continued)
Restoring a backup
Step
9
10
11
12
13
14
15
16
17
18
Network Wide Backup & Restore User Guide 450-3101-031 Rel 1.0 Standard June 1999
Administration of Network Wide Backup & Restore 3-11
Action
Click on the Restore button
A secondary window appears and shows the status of the restore to the
controller.
If the controller type is
Express
OPC or NPC
Open the PC GUI.
Log on to the NP that is being restored.
Click on the Admin menu.
Click on the Database Save and Restore submenu. The Database Save and
Restore dialog opens.
Click on Validate.
If the database is
correct
not correct
Click on Commit to restore the database.
Click on OK in the warning dialog.
Click on Cancel to not restore the database (for example, if the wrong
database had been selected).
Note: You must either commit or cancel a restore.
Go to the NTPs for restoring an OPC or NPC database.
—end—
.
NTP Update Issue 1 July 1999
Then go to
step 10
step 18
Then go to
step 15
step 17
3