Application Level Debugging - Nortel Call Recording Card User Manual

September 2007

Application level debugging

The following section documents application level debugging.
Task logging commands
Table 16: "Task logging commands," on page 61 lists the commands to turn
logging on and off for each of the individual tasks in the Nortel Call
Recording Card application.
Table 16:
Task
DSPM
Aries
VP-App
Socket
Client
Planning, Installation, and Administration Guide
Task logging commands
Turn logging:
On
gLogDspm=1
AriesDebugOn 0,X
tcmDebugOn 0,X
vpDebugOn
socketDebugOn
clientDebugOn
Test and Debug Capabilities
Off
gLogDspm=0
ariesDebugOff 0,X 0,X -- range of
tcmDebugOff 0,X
vpDebugOff
socketDebugoff
clientDebugOn
Parameters
channels
61