Jumpers And Connectors - Supermicro X13SRA-TF Quick Reference Manual

P c
ackage ontents
• One Supermicro Motherboard
• One Quick Reference Guide
• One I/O Shield
• Six SATA Cables

Jumpers and Connectors

Jumper
JBT1
JCMOS
JPAC1
JPL1, JPL2
JPME2
JPUSB1
JWD1
Connector
12V_PUMP_PWR1
AUDIO FP
BATTERY
COM1
FAN1, FAN2
FANA – FANC
HD AUDIO
JD1
JF1
JL1
JOH1
JPI2C1
JPW1
JPW2, JPW3
JRK1
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
JUIDB1
LAN1
LAN2
M.2-C01, M.2-C02
SATA0 – SATA5
(PCH) SLOT1
(CPU) SLOT2/4/6
SP1
USB0/1
USB2/3
USB4, USB5
USB6, USB7
USB8
USB9
VGA
• One GPU to CPU Power Cable
• One E1A Carrier for Intel W-3400 (112L) XCC CPU
• One E1B Carrier for Intel W-2400 (64L) MCC CPU
Description
Clear CMOS (Onboard)
Clear CMOS (Onboard)
HD Audio Enable/Disable
LAN1/LAN2 Enable/Disable
Intel Manufacturing Mode
USB6/7 Standby Power
Watchdog Function Enable
Connectors
12V 4-pin Power Connector (for CPU liquid cooling pump)
Front Panel Audio Header
Onboard Battery
Back Panel COM Port
CPU Fan Headers
System Fan Headers
Back Panel High Definition Audio Ports
Speaker/Buzzer Header
Front Control Panel Header
Chassis Intrusion Header
Overheat LED Header
Power Supply SMBus I C Header
2
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU Power Connectors
Intel VROC RAID Key Header
* A VROC hardware key is required for VROC RAID function.
SATA Disk-On-Module (DOM) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header (5V)
Trusted Platform Module (TPM)/Port 80 Header
* If PCH SLOT1 is to be installed with a 3/4-length PCIe card and/or CPU SLOT2 with a double-width 3/4-length PCIe
card, please use a horizontal TPM module for JTPM1 to prevent mechanical conflict.
Unit Identifier (UID) Switch / BMC Reset Button
RJ45 1GbE LAN Port (Shared IPMI LAN port)
RJ45 10GbE LAN Port
PCIe 5.0 x4 M.2 M-key Sockets (Support 22110/2280 form factors and RAID 0/1)
Intel SATA 3.0 Ports (6Gb/second)
PCIe 4.0 x4 Slot
PCIe 5.0 x16 Slots
Internal Speaker/Buzzer
Front Access USB 2.0 Header
Front Access USB 3.2 Gen. 1 Header (5Gb, Type-A)
Back Panel USB 3.2 Gen. 2 Ports (10Gb, Type-A)
Back Panel USB 3.2 Gen. 2 Ports (10Gb, Type-A)
Back Panel USB 3.2 Gen. 2x2 Port (20Gb, Type-C)
Front Access USB 3.2 Gen. 2x2 Header (20Gb, Type-C)
VGA Port (IPMI only)
Jumpers
Description
Default Setting
Short Pads to Clear CMOS
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)