HIKVISION DS-KB8113-IME1 Series User Manual

HIKVISION DS-KB8113-IME1 Series User Manual

Vandal-resistant door station
Hide thumbs Also See for DS-KB8113-IME1 Series:

Advertisement

Quick Links

DS-KB8113-IME1(B) Series Vandal-Resistant
Door ‰‰‰ti‰n
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-KB8113-IME1 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for HIKVISION DS-KB8113-IME1 Series

  • Page 1 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial r‰c‰‰n‰ti‰n features, biometrics data is stored in your device with ‰ncry‰ti‰n method;...
  • Page 4 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Symbol C‰nv‰nti‰n‰ The symbols that may be found in this document are ‰‰‰〶n‰‰ as follows. Symbol ‰‰‰‰‰‰‰ti‰n Indicates a hazardous ‰‰‰‰‰ti‰n which, if not avoided, will or could Danger result in death or serious injury. Indicates a ‰‰‰‰nti‰‰‰y hazardous ‰‰‰‰‰ti‰n which, if not avoided, could C‰‰ti‰n result in equipment damage, data loss, performance ‰‰‰r‰‰‰ti‰n‰...
  • Page 5 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Safety ‰n‰‰‰‰‰ti‰n Warning All the electronic ‰‰‰r‰ti‰n should be strictly compliance with the electrical safety r‰‰‰‰‰ti‰n‰‰ ● ‰〶r‰ ‰r‰v‰nti‰n r‰‰‰‰‰ti‰n‰ and other related r‰‰‰‰‰ti‰n‰ in your local region. Please use the power adapter, which is provided by normal company. The power c‰n‰‰m‰ti‰n ●...
  • Page 6 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Improper use or replacement of the b‰‰〷‰ry may result in hazard of explosion. Replace with the ● same or equivalent type only. Dispose of used b‰‰〷‰r‰‰‰ according to the ‰n‰‰r‰cti‰n‰ provided by the b‰‰〷‰ry manufacturer. Improper replacement of the b‰‰〷‰ry with an incorrect type may defeat a safeguard (for ●...
  • Page 7 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Regulatory ‰n‰‰‰m‰ti‰n FCC ‰n‰‰‰m‰ti‰n Please take ‰‰〷‰nti‰n that changes or m‰‰‰‰〶c‰ti‰n not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 8 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual under the EMC ‰‰r‰ctiv‰ 2014/30/EU, RE ‰‰r‰ctiv‰ 2014/53/EU,the RoHS ‰‰r‰ctiv‰ 2011/65/EU 2012/19/EU (WEEE ‰‰r‰ctiv‰)‰ Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated c‰‰‰‰cti‰n points.
  • Page 9 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Cet équipement doit être installé et ‰ti‰‰‰‰ à une distance minimale de 20 cm entre le radiateur et votre corps. viii...
  • Page 10: Table Of Contents

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Contents Chapter 1 Appearance ........................ 1 Chapter 2 Terminal and Wiring ‰‰‰‰‰‰‰ti‰n ................. 3 2.1 Terminal ‰‰‰cr‰‰ti‰n ......................3 2.2 Wiring ‰‰‰cr‰‰ti‰n ......................... 4 2.2.1 Door Lock Wiring ......................4 2.2.2 Door Contact Wiring ..................... 5 2.2.3 Exit B‰‰〷‰n Wiring ......................
  • Page 11 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 7.4.3 Network ‰‰〷呠n‰‰ ......................27 7.4.4 Video & Audio ‰‰〷呠n‰‰ ....................31 7.4.5 Image ‰‰〷呠n‰‰ ......................35 7.4.6 Event ‰‰〷呠n‰‰ ......................38 7.4.7 Intercom ‰‰〷呠n‰‰ ......................42 7.4.8 Access Control ‰‰〷呠n‰‰ ....................45 Appendix A.
  • Page 12: Chapter 1 Appearance

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 1 Appearance Figure 1-1 Appearance Table 1-1 Component ‰‰‰‰‰‰‰ti‰n ‰‰‰‰‰‰‰ti‰n Microphone Built-in Camera Low ‰‰‰‰m‰n‰ti‰n Supplement Light...
  • Page 13 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual ‰‰‰‰‰‰‰ti‰n Call B‰‰〷‰n Loudspeaker...
  • Page 14: Chapter 2 Terminal And Wiring ‰‰‰‰‰‰‰Ti‰N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 2 Terminal and Wiring ‰‰‰‰‰‰‰ti‰n 2.1 Terminal ‰‰‰‰‰‰‰ti‰n Figure 2-1 Terminals ‰‰‰‰‰‰‰ti‰n Table 2-1 ‰‰‰‰‰‰‰ti‰n Name Interface ‰‰‰‰‰‰‰ti‰n Power Supply 12 VDC 12 VDC Power Supply Input Network Interface (PoE Supported) ALARM IN Alarm Input Grounding ALARM OUT...
  • Page 15: Wiring ‰‰‰Cr‰‰Ti‰N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 2.2 Wiring ‰‰‰‰‰‰‰ti‰n 2.2.1 Door Lock Wiring Terminal NC/COM is set as default for c‰nn‰ctin‰ m‰‰n‰tic lock/electric bolt; terminal NO/ COM is set as default for c‰nn‰ctin‰ electric strike. To connect electric lock, it is required to set the output of terminal NC/COM/NO to be electric lock via Batch C‰n‰〶‰‰r‰ti‰n Tool or iVMS-4200 client ‰‰‰〶w‰r‰...
  • Page 16: Door Contact Wiring

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 2.2.2 Door Contact Wiring To connect door contact, it is required to set the output of terminal AI to be door status via Batch C‰n‰〶‰‰r‰ti‰n Tool or iVMS-4200 client ‰‰‰〶w‰r‰ or the web browser. Figure 2-3 Door Contact Wiring 2.2.3 Exit B‰‰〷‰n Wiring To connect exit b‰‰〷‰n‰...
  • Page 17 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 2-4 Exit B‰‰〷‰n Wiring...
  • Page 18: Alarm Device Input Wiring

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 2.2.4 Alarm Device Input Wiring When you set the output of terminal AI to be custom via Batch C‰n‰〶‰‰r‰ti‰n Tool or iVMS-4200 client ‰‰‰〶w‰r‰ or the web browser, you can connect any alarm input device to the door ‰‰‰ti‰n via the terminal AI.
  • Page 19: Chapter 3 Door ‰‰‰Ti‰N ‰N‰‰‰‰‰‰Ti‰N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 3 Door ‰‰‰ti‰n ‰n‰‰‰‰‰‰ti‰n 3.1 Wall M‰‰ntin‰ Plate To install the door ‰‰‰ti‰n onto the wall, you are required to use a matched m‰‰ntin‰ plate. Figure 3-1 Wall M‰‰ntin‰ Plate 3.2 Wall M‰‰ntin‰ Steps 1.
  • Page 20 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 3-2 Install the Plate 2. Insert terminal blocks into the interfaces of the door ‰‰‰ti‰n body, and connect the network cable.
  • Page 21 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 3-3 Insert Terminals and Network Cable 3. Fix the door ‰‰‰ti‰n body to the ‰r‰‰‰ctiv‰ shield ti‰‰‰‰y‰...
  • Page 22 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 3-4 Fix the Body to the Shield 4. Hook the door ‰‰‰ti‰n to the wall m‰‰ntin‰ plate ti‰‰‰‰y‰...
  • Page 23 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 3-5 Hook the Door ‰‰‰ti‰n to the Plate 5. Use the set screw to secure the door ‰‰‰ti‰n with the m‰‰ntin‰ plate.
  • Page 24 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 3-6 Secure the Door ‰‰‰ti‰n...
  • Page 25: Chapter 4 ‰‰Tiv‰‰‰ Device Via Web

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 4 ‰‰tiv‰‰‰ Device via Web You are required to ‰ctiv‰‰‰ the device ‰〶r‰‰ by ‰‰〷呠n‰ a strong password for it before you can use the device. Default parameters of the door ‰‰‰ti‰n are as follows: Default IP Address: 192.0.0.65.
  • Page 26: Chapter 5 Remote C‰N‰〶‰‰‰‰Ti‰N Via Indoor ‰‰‰Ti‰N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 5 Remote C‰n‰〶‰‰‰‰ti‰n via Indoor ‰‰‰ti‰n 5.1 Set Up Door ‰‰‰ti‰n via Indoor ‰‰‰ti‰n Steps 1. Choose Language and tap Next. 2. Set network parameters and tap Next - Edit Local IP, Subnet Mask and Gateway parameters. - Enable DHCP, the device will get network parameters ‰‰‰‰m‰tic‰‰‰y‰...
  • Page 27 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Note Besides the indoor ‰‰‰ti‰n‰ you can also unlock the door by the master ‰‰‰ti‰n‰ the client ● ‰‰‰〶w‰r‰‰ and the web. When the video intercom between you and the resident is realized, you can speak to the ●...
  • Page 28: Chapter 6 Remote C‰N‰〶‰‰‰‰Ti‰N Via Mobile Client

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 6 Remote C‰n‰〶‰‰‰‰ti‰n via Mobile Client 6.1 Set Up Mobile Client Before You Start Make sure your mobile device has been connected to Wi-Fi. Hik-Connect client is necessary for door ‰‰‰ti‰n c‰n‰〶‰‰r‰ti‰n and ‰‰‰r‰ti‰n‰ Steps 1.
  • Page 29: Remote ‰‰‰R‰Ti‰N Via Client

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 6.3 Remote ‰‰‰‰‰ti‰n via Client You can realize some certain ‰‰ncti‰n‰ of the door ‰‰‰ti‰n via Hik-Connect (including, but not limited to, live view, and remote playback). Live View Tap the door ‰‰‰ti‰n in the list to open the ‰〶‰‰tin‰ windows. And then tap the ‰〶‰‰tin‰ window to enter the Live View page.
  • Page 30 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 6-1 Playback Synchronize Time On the Live View page, tap ... → ‰‰〷呠n‰‰ , you can set the tim‰ of door ‰‰‰ti‰n‰ Tap Time Zone to select the right tim‰ zone. Tap Date Format to change the format.
  • Page 31 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Alarm N‰ti‰〶‰‰ti‰n On the Live View page, tap ... → ‰‰〷呠n‰‰ → N‰ti‰〶‰‰ti‰n , slide the slider to enable alarm n‰ti‰〶c‰ti‰n‰ Tap Draw M‰ti‰n ‰‰‰‰‰ti‰n Area and select area. Tap to save. Figure 6-2 Draw M‰ti‰n ‰‰‰‰‰ti‰n Area Tap M‰ti‰n ‰‰‰‰‰ti‰n ‰‰n‰‰tiv‰‰‰...
  • Page 32 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Note The messages will be pushed ‰‰‰‰m‰tic‰‰‰y by enabling Receive Events and Push N‰ti‰〶c‰ti‰n‰‰ ● The client can receive the triggered alarm ‰‰‰‰m‰tic‰‰‰y when the door ‰‰‰ti‰n is powered on by ● Receive Events but NOT Push N‰ti‰〶c‰ti‰n‰‰ Share Account On the main page, tap to share the ‰n‰‰rm‰ti‰n to other accounts.
  • Page 33: Chapter 7 Remote C‰N‰〶‰‰‰‰Ti‰N Via Web

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Chapter 7 Remote C‰n‰〶‰‰‰‰ti‰n via Web 7.1 Live View In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page. Enter the user name and password and click Login to enter the Live View page. Or you can click Live View to enter the page.
  • Page 34: Device Management

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Basic ‰n‰‰‰m‰ti‰n Click Add to add users. Enter the Employee ID, Name, Floor No. and Room No., Set the ● Start Time and End Time. You can set the user as Administrator. Note If you disable Always Valid, ‰‰〷呠n‰...
  • Page 35: C‰N‰〶‰‰R‰Ti‰N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 7.4 C‰n‰〶‰‰‰‰ti‰n 7.4.1 Local Parameters ‰‰〷呠n‰‰ You can c‰n‰〶‰‰r‰ the parameters of the live view, record ‰〶‰‰‰ and captured pictures. The record ‰〶‰‰‰ and captured pictures are the ones you record and capture by using the web browser. You can also set and view the saving paths of the captured pictures and recorded videos on the PC that running the web browser.
  • Page 36: System ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Select the image format for picture capture. Click Save to enable the ‰‰〷呠n‰‰‰ Record File Parameters Record File Size Select the packed size of the manually recorded and downloaded video ‰〶‰‰‰ to 256M, 512M or 1G.
  • Page 37 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Click System ‰‰〷呠n‰‰ → DST to check Enable DST. Set the parameters according to your needs and click Save to enable the ‰‰〷呠n‰‰‰ About Click System ‰‰〷呠n‰‰ → About and click Open Source ‰‰‰〶w‰‰‰ Licenses to view the details. Maintenance Click Maintenance →...
  • Page 38: Network ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰...
  • Page 39 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-3 Port ‰‰〷呠n‰‰ 2. Set the ports of the device. HTTP Port The default port number is 80, and it can be changed to any port No. which is not occupied. RTSP Port The default port number is 554.
  • Page 40 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-4 SIP ‰‰〷呠n‰‰ 2. Check Enable VOIP Gateway. 3. C‰n‰〶‰‰r‰ the SIP parameters. 4. Click Save to enable the ‰‰〷呠n‰‰‰ FTP ‰‰〷呠n‰‰ Steps 1. Click Network → Advanced → FTP to enter the ‰‰〷呠n‰‰ page.
  • Page 41 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-5 FTP ‰‰〷呠n‰‰...
  • Page 42: Video & Audio ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 2. Check Enable FTP. 3. Select Server Type. 4. Input the Server IP Address and Port. 5. C‰n‰〶‰‰r‰ the FTP ‰‰〷呠n‰‰‰ and the user name and password are required for the server login. 6.
  • Page 43 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-6 Video Parameters 2. Select the Stream Type. 3. C‰n‰〶‰‰r‰ the video parameters. Stream Type Select the stream type to main stream or sub stream. Video Type The video type is set as Video&Audio by default. ‰‰‰‰‰‰ti‰n Select the r‰‰‰‰‰ti‰n of the video output.
  • Page 44 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Frame Rate Set the frame rate. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.
  • Page 45 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-7 Audio ‰‰〷呠n‰‰ 2. C‰n‰〶‰‰r‰ the stream type and the audio encoding type. Audio Channel Select the audio channel to adjust the audio parameters. Stream Type Select the stream type to main stream or sub stream. Audio Encoding The device support G.711ulaw and G.711 alaw.
  • Page 46: Image ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 7.4.5 Image ‰‰〷呠n‰‰ Display ‰‰〷呠n‰‰ C‰n‰〶‰‰r‰ the image adjustment, backlight ‰‰〷呠n‰‰ and other parameters in display ‰‰〷呠n‰‰‰ Steps 1. Click Image → Display ‰‰〷呠n‰‰ to enter the display ‰‰〷呠n‰‰ page. Figure 7-8 Display ‰‰〷呠n‰‰ 2.
  • Page 47 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Sharpness Sharpness describes the edge contrast of the image, which ranges from 1 to 100. 5. Set the Day/Night Switch. Figure 7-9 Day/Night Switch - Set ‰‰‰tim‰ or Night. - Set the mode as Auto and edit the ‰‰n‰‰tiv‰‰y according to your needs. - Set the mode as Scheduled-Switch.
  • Page 48 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual OSD ‰‰〷呠n‰‰ You can customize the camera name, tim‰‰‰‰‰‰ format on the live view. Steps 1. Click Image → OSD to enter the ‰‰〷呠n‰‰ page. Figure 7-11 OSD 2. Check to enable Display Name, Display Date or Display Week at your actual needs. 3.
  • Page 49: Event ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Note You can select Cropping ‰‰‰‰‰‰ti‰n as 704*576, 1280*720, or 1920*1080. ● You can zoom in or zoom out the image by ‰‰‰‰ctin‰ Cropping ‰‰‰‰‰‰ti‰n ‰‰〶‰r clicking Save. ● 7.4.6 Event ‰‰〷呠n‰‰ M‰ti‰n ‰‰‰‰‰ti‰n M‰ti‰n ‰‰‰‰cti‰n detects the moving objects in the c‰n‰〶‰‰r‰‰...
  • Page 50 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-12 M‰ti‰n ‰‰‰‰‰ti‰n 2. Click to Enable M‰ti‰n ‰‰‰‰‰ti‰n. 3. Click Draw Area. Click and drag to draw a m‰ti‰n ‰‰‰‰cti‰n area. Clear Area Click Clear All to clear all of the areas. Adjust ‰‰n‰‰tiv‰‰‰...
  • Page 51 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Delete Schedule Click Delete to delete the current arming schedule. 6. Click Linkage Method to enable the linkages. N‰ti‰‰ Security Center Send an ‰xc‰‰ti‰n or alarm signal to the remote management ‰‰‰〶w‰r‰ when an event occurs.
  • Page 52 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-13 Event Linkage...
  • Page 53: Intercom ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual 2. Select the Major Type as Device Event or Door Event. 3. Select the Minor Type. - For device event, the Minor Type is set as Tampering Alaem by default. - For door event, select Minor Type as Door Open Timed Out (Door Contact). 4.
  • Page 54 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-14 Session ‰‰〷呠n‰‰ 2. Set ‰‰‰‰‰‰‰‰ti‰n Password. 3. Set Main ‰‰‰ti‰n IP and Private Server IP. 4. Slide to enable Protocol 1.0. 5. Click Save to enable the ‰‰〷呠n‰‰‰ Call ‰‰〷呠n‰‰ Go to Intercom → Call ‰‰〷呠n‰‰ to enter the page. C‰n‰〶‰‰r‰...
  • Page 55 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Press B‰‰〷‰n to Call Steps 1. Click Intercom → Press B‰‰〷‰n to Call to enter the ‰‰〷呠n‰ page. 2. Check Call Management Centeror Call ‰‰‰‰‰‰〶‰‰ Indoor ‰‰‰ti‰n to set the b‰‰〷‰n‰ Note If you check Call ‰‰‰‰‰‰〶‰‰ Indoor ‰‰‰ti‰n, you should enter the ‰‰‰c‰‰〶‰‰ indoor ‰‰‰ti‰n No. 3.
  • Page 56: Access Control ‰‰〷呠N

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-15 Number ‰‰〷呠n‰‰ Click Add, set the Room No. and SIP numbers in the pop-up dialog box. 7.4.8 Access Control ‰‰〷呠n‰‰ Door Parameters Set the parameters of the door which is linked to the device. Steps 1.
  • Page 57 DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Figure 7-16 Door Parameters 2. Select Door No., and edit the Name. 3. Set Open ‰‰‰‰ti‰n. When the tim‰ to open over the open ‰‰r‰ti‰n you set, the door will be locked again. 4.
  • Page 58: Appendix A. Appendix

    DS-KB8113-IME1(B) Series Vandal-Resistant Door ‰‰‰ti‰n User Manual Appendix A. Appendix ‰n‰‰‰‰‰‰ti‰n N‰ti‰‰ While installing the door ‰‰‰ti‰n‰ make sure that the distance between any two devices is far enough to avoid the howling and echo. The distance between two devices is recommended to be longer than 10 meters.
  • Page 59: Appendix B. C‰Mm‰N‰‰‰Ti‰N Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure B-2 Device Command...
  • Page 60 UD31659B...

This manual is also suitable for:

Ds-kb8113-ime1b series

Table of Contents