Advertisement
Annex Manager R3.0 Release Notes
166-025-511
2
networked nodes. It is not intended to be a generic SNMP management
tool.
Annex Manager provides features that have not been available with the
NA utility. Users can:
•
Configure Annexes in Setup or Customize mode.
•
Setup mode allows users to configure one or more Annexes
by setting the most commonly used parameters.
•
Customize mode lets users set individual Annex parameters
and provides access to all main menu commands.
•
Save current configuration parameter settings in Script files and
restore the parameters from those files.
•
Edit script files with a common editor on the workstation.
•
Compare the configuration parameters of two ports on the same
Annex or on different Annexes.
•
Copy the current configuration parameter settings from one port
to another or one Annex to another.
•
Retrieve basic status and statistics information from the Annex.
•
Define parameter groups to simplify configuration operations.
•
Define site specific defaults.
•
Discover Annexes in the network.
•
Save Annex address lists after discovery and add names to the
lists manually.
•
Display default values for each configuration parameter on
demand.
•
Display on-line documentation for all Annex configuration
parameters, all Annex Manager windows and all widgets on the
screens.
•
Boot and reset an Annex.
•
Broadcast messages to users on Annex ports.
•
Automatically reset ports or Annex subsystems after changing
configuration parameters.
Rev. C
Advertisement
