Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
No image is output to the TV from the connected HDMI device when the unit is in standby
mode.
When the unit enters standby mode, the image from the last HDMI device selected before you turned off the unit is
displayed. If no image is output to the TV, perform the following operations.
Turn on the unit to select the HDMI device from which you want to enjoy content.
Make sure [Standby Through] is set to [Auto] or [On] in the [HDMI Settings] menu.
Related Topic
Enjoying content of a connected device without turning on the unit (Standby Through)
5-037-030-11(1) Copyright 2022 Sony Corporation
293
Advertisement
Table of Contents
