Sony STR-AN1000 Startup Manual page 124

Multi channel av receiver

Hide thumbs Also See for STR-AN1000:

Table of Contents

Multi Channel AV Receiver/Multi Channel AV Amplifier

STR-AN1000/TA-AN1000

Connecting 5.1.2-channel speaker system using front Dolby Atmos enabled speakers

Connect each speaker to the SPEAKERS terminals on the rear of the unit.

Before connecting cables, be sure to disconnect the AC power cord (mains lead).

For details on how to connect speaker cables to the unit, see

Monaural audio cable (not supplied)

Speaker cable (not supplied)

After connecting Dolby Atmos-enabled speakers, set [Speaker Pattern] in [Manual Speaker Settings] under [Speaker Settings]

to [5.1.2 (FD)].

Connect speakers with a nominal impedance of 6 ohms to 16 ohms.