Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Selectable sound fields and their effects
Sound field
2ch Stereo
2CH/MULTI
Multi Stereo
Direct
A.F.D. (Auto
Format
Decoding)
A.F.D. Movie
MOVIE
Dolby Mode
DTS:X Mode
Audio
MUSIC
Enhancer
Headphone
Headphones
(2ch)
Note
Display panel
Plays back 2-channel audio signals without adding any surround effect.
Monaural and multichannel audio signals are output after being converted
into a 2-channel signal.
This sound field is best suited for playing back audio signals as they are
2CH STEREO
from two front speakers only, without adding any virtual surround effect.
The sound is output from the front left/right speakers only. There is no
sound from the subwoofer.
Outputs sound from all connected speakers.
When 2-channel or monaural audio signals are input, the unit outputs
sound from all speakers without adding any surround effect.
MULTI ST.
When multi-channel audio signals are input, sound may not be output
from certain speakers depending on the speaker settings or playback
content.
DIRECT
Plays back all audio signals without adding any surround effect.
Decodes and plays back audio signals using the optimal processing
A.F.D.
method according to the audio signal input.
Produces optimized (recommended) sound according to the stream. The
A.F.D. MOVIE
sound is upmixed to enjoy surround at the same time.
DOLBY
Plays back content using Dolby upmixer or virtual technology according to
MODE
the set speaker layout.
Plays back content using DTS upmixer or virtual technology according to
DTS:X MODE
the set speaker layout.
Upscales existing sound sources to near high-resolution sound quality
with DSEE Ultimate (Digital Sound Enhancement Engine Ultimate). This
sound field makes you feel as if you are really at the recording studio or
A.ENHANCER
concert.
DSEE Ultimate only works on 2-channel sound sources with a sampling
frequency of 44.1 kHz or 48 kHz.
This mode is selected automatically when headphones are connected to
the PHONES jack or BLUETOOTH headphones/BLUETOOTH speakers
are connected to the unit. (Other sound fields cannot be selected in this
HP 2CH
case.) Plays back 2-channel audio signals without adding any surround
effect. Sound from monaural and multi-channel audio signals are output
after being converted into a 2-channel signal.
Effects of the sound field
165
Advertisement
Table of Contents
