Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Adjusting the equalizer (Equalizer)
You can use the following parameters to adjust the tonal quality (bass/treble level) of each speaker.
Level (dB)
Frequency (Hz)
Bass
Treble
Select [Sound Effects] - [Equalizer] from the home menu.
1
Select [Front], [Center], [Surround] or [Height].
2
Select [Bass] or [Treble].
3
Adjust the gain.
4
Note
This function does not work in the following cases:
[Pure Direct] is set to [On].
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On], and the unit is playing audio signals in DSD format.
Frequencies for [Bass] and [Treble] are fixed.
Depending on the audio format, the unit may play signals at a lower sampling frequency than the original sampling frequency of the
input signals.
Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected.
Hint
You can also select [Equalizer] in [Setup] - [Speaker Settings] - [Manual Speaker Settings] from the home menu.
5-037-030-11(1) Copyright 2022 Sony Corporation
170
Advertisement
Table of Contents
