Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver/Multi Channel AV Amplifier
STR-AN1000/TA-AN1000
Viewing information on the display panel
The display panel provides various information on the status of the unit, such as the sound field.
Select the input for which you want to check information.
1
Press DISPLAY MODE on the unit repeatedly.
2
Each time you press DISPLAY MODE, the display will change cyclically as follows:
Index name of the input (*1) - Input you selected - Sound field currently applied (*2) - Volume level - Stream information
(*3)
When listening to FM radio (For US, Canadian, and Asia-Pacific models only)
Preset station name (*1) - Frequency - Sound field currently applied (*2) - Volume level - Stream information (*3)
When receiving BLUETOOTH audio
Name of the connected device - Sound field currently applied (*2) - Volume level - Stream information (*3)
*1
Index name appears only when you have assigned one to the input or preset station. Index name does not appear if only blank spaces have been
entered or it is same as the input name.
*2
[PURE.DIRECT] appears on the display panel when the [Pure Direct] function is activated.
*3
Stream information may not be displayed.
Checking the information of a connected BLUETOOTH device
You can check the BLUETOOTH device information by pressing DISPLAY MODE on the unit repeatedly. Each time you press
DISPLAY MODE, the display will change cyclically as follows:
During BLUETOOTH RX mode: Input you are selecting - BLUETOOTH device name - Sound field currently applied -
Volume level - Stream information
During BLUETOOTH TX mode: BLUETOOTH device name - Sound field currently applied - Volume level - Stream
information - Input you are selecting
Note
Characters or marks in some languages may not be displayed.
Related Topic
Indicators on the display panel
5-037-030-11(1) Copyright 2022 Sony Corporation
103
Advertisement
Table of Contents
