Bios Setup; Boot Up The Operating System And Install The Drivers - DIGITAL-LOGIC SmartModule Express SMX945 User Manual

DIGITAL-LOGIC AG
SMX945 Condensed Manual V1.0A

4.1. BIOS Setup

Since the BIOS is auto-configuring during the start-up procedure, normally the user does not enter the BIOS
setup. Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS
manual "SMX945_BIOS" printed from the CD for the BIOS setup details.

4.2. Boot Up the Operating System and Install the Drivers

Depending on which boot drive is available, boot up the operating system from the CompactFlash, hard disk,
or floppy disk.
To install the drivers, see the driver/software/BIOS manual "SMX945_BIOS" on the Product CD.
20