Table of Contents
Advertisement
DIGITAL-LOGIC AG
For internal use only:
File:
SMX945_Condensed_V1.0A.doc
Path:
R:\HANDBUCH\smart\SMX945\SMX945_Condensed_V1.0A.doc
COPYRIGHT © © © © 2007 BY DIGITAL-LOGIC AG
This publication is protected by copyright and all rights are reserved. No part of this document may be
reproduced, transmitted, transcribed or stored in a retrieval system, in any form or by any means, electronic,
mechanical, optical, manual, or otherwise, without the prior written permission of DIGITAL-LOGIC AG.
The software described herein, together with this document, are furnished under a license agreement and
may be used or copied only in accordance with the terms of that agreement.
About this Manual and How to Use It
This manual is written for the original equipment manufacturer (OEM) who plans to build computer systems
based on the single board MICROSPACE-PC. It is for integrators and programmers of systems based on the
MICROSPACE-Computer family. This manual provides instructions for installing and configuring the board,
and describes the system and setup requirements. This document contains information on hardware
requirements, interconnections, and details of how to program the system. Please check the Product CD for
further information and manuals.
REVISION HISTORY:
Document
Date/Initials:
Version
V1.0
05.2007 KUF
V1.0A
07.2007 WAS
Attention!
1. All information in this manual, and the product, are subject to change without prior notice.
2. Read this manual prior to installation of the product.
3. Read the security information carefully prior to installation of the product.
Modification:
Remarks, News, Attention:
Initial Version
Control & general corrections / Updated block diagram
2
SMX945 Condensed Manual V1.0A
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartModule Express SMX945 and is the answer not in the manual?
Questions and answers