Configuration Tab Options; Table 4-2. Access Point Dialog Box Status Symbols - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point
There are three possible status symbols in the first column of the access point
dialog box.
Table 4-2.
Symbol
-
*
!
Click your access point (select only one device).
2.
Click Configure.
3.
The AP Manager logs in to the access point and then opens the Configuration
dialog box, with the Basic tab option selected
Note: The Configuration dialog box may also open if you:
• Choose Configure > Quick List > (group name). Group has one access point.
• Choose Configure > Group > (group name). Group has one access point.

Configuration Tab Options

The following sections describe the tabs in for the Configuration dialog box. Use
the tabs to define operational parameters for an access point.
4-8
Table 4-2 describes these status symbols.
Access Point Dialog Box Status Symbols
Description
Access point is not recognized by the AP Manager application.
Access point has been verified by the AP Manager application.
AP Manager attempted to verify the access point, but the attempt failed.
(Figure 4-5).
203939-B