Table of Contents
Advertisement
connectors to connect antennas to the ports on the side of the Nortel Networks WLAN - Access
Point. See the following figure for antenna port markings.
Figure -
Nortel Networks WLAN - Access Point External Antenna Port Markings
About Mounting Options
Note:
Because the Nortel Networks WLAN - Access Point internal antennas have been
designed to reduce inter-floor interference, it is strongly recommended that you mount the
Nortel Networks WLAN - Access Point standing or hanging straight up or down.
Note:
You can mount the Nortel Networks WLAN - Access Points in the ceiling plenum or below
the ceiling using the ceiling mount base or wall mount brackets, but the Nortel Networks
WLAN - Access Points perform best when mounted below the ceiling.
Note:
Plenum-mounted Nortel Networks WLAN - Access Points and Remote Edge Access Points
MUST BE powered using Power Over Ethernet (POE) to comply with safety regulations.
•
When you are mounting the Nortel Networks WLAN - Access Point in the middle of a ceiling,
ceiling plenum, or hallway, you will typically use the color-coordinated ceiling-mount base to
stabilize the Nortel Networks WLAN - Access Point after it is mounted. Use the mounting base
to mark the sheet metal, drywall, or other screw locations.
March 16, 2004
Planning Notes
About Mounting Options
26
Advertisement
Table of Contents
