Communication Server 1000M and Meridian 1
18 Reposition the EMI shield (it looks like a brass grill) in the base of the
module. Tape over the front mounting tabs to hold the shield in position.
You will remove the tape later.
WARNING
If you do not tape the EMI shield in position, you will not
be able to install the card cage in the module correctly.
CAUTION
Check for and remove any debris (such as screws) that
fell into the base of the UEM module.
Performing the upgrade
.
End of Procedure
81C IGS to CS 1000M MG CP PII FNF Upgrade
Page 63 of 284