Nortel Meridian Meridian 1 Upgrade Manual page 40

Page 40 of 284 Performing the upgrade
Check equipment received
Check vintage requirements for existing hardware
NN43021-469 Standard 01.01 May 2007
This section describes the minimum equipment required for CP PII with
FNF. Additional equipment can also be installed during the upgrade. Verify
that all equipment has been received.
Before the upgrade, check that the equipment on the order form is also on the
packing slip. Check that all equipment has been received. If any items are
missing, contact your supplier for replacements before you begin the upgrade.
CAUTION
Service Interruption
DO NOT proceed with the upgrade if any of the required
equipment is missing. All equipment must be received to
complete the upgrade.
Check required software
The following software packages are required to upgrade a system to
Meridian 1 Option 81C with CP PII:
• CORENET Core Network Module Package 299
• FIBN Fiber Network Package 365
• CS 1000 Release 5.0
• CPP_CNI CP Pentium Backplane for Intel Machine Package 368
• Software Install Kit
Check the list below to make sure that existing hardware meets the minimum
vintage requirements for CP PII.
• The QPC441 3-Port Extender (3PE) cards must be minimum vintage F.
• The NTRB53 Clock Controller cards must be minimum vintage A.
• NTRB33 Fiber Junctor Interface (FIJI) Card minimum vintage AC.
• NT5D12AC, AD, and AG (1.54 MB)