Nortel Meridian Meridian 1 Upgrade Manual page 126
81c igs to cs 1000m mg cp pii fnf upgrade
Hide thumbs
Also See for Meridian Meridian 1:
- Feature description and administration (1816 pages) ,
- Scripting manual (812 pages) ,
- Maintenance manual (504 pages)
Table of Contents
Advertisement
Page 126 of 284
Unpack and install NT6D41CA (DC) or NT8D29BA (AC)
Power Supply
NN43021-469 Standard 01.01 May 2007
Performing the upgrade
8
Secure the card cage and EMI shield to the module re-using the existing
screws.
9
Pre-route cables NT4N88AA, NT4N88BA and NT4N90BA.
a.
Route cable NT4N88AA from COM1 on the CP PIV faceplate to J25
on the I/O panel. (NT4N88AA is used to connect a terminal.)
b.
Route cable NT4N88BA from COM2 on the CP PIV faceplate to J21
on the I/O panel. (NT4N88BA is used to connect a modem.)
10 Route cable NT4N90BA from LAN 1 on the CP PIV faceplate to J31 (top)
of the I/O panel.
11 Do not connect the NTRC17BA crossover ethernet cable at this time.
Procedure 36
Installing the power supply
1
Unpack the power supply.
2
Faceplate disable the power supply.
3
Insert power supply into Core/Net module power supply slot.
End of Procedure
End of Procedure
Advertisement
Table of Contents
