Table of Contents
Advertisement
3
Decrypt Setup Menu
MODE Field
NO (Number) Field
PGM (Program) Field
AS (Authorization State) Field
34
Use this menu to specify up to four services in the transport stream to decrypt. This
menu is operational when the transport stream output is not configured for PID
aliasing. When the DSR-6000 is configured for PID aliasing, it decrypts the single
service that is selected by the virtual channel or MPEG program number.
When this field is set to AUTO, the DSR-6000 decrypts the first four services by
MPEG program number, in low-to-high order. When this field is set to Manual, use
the NO field and PGM field to specify which services to decrypt.
Use this field to select among the four service slots available for decryption. These
decryption slots are numbered 0, 1, 2, and 3. The PGM field can have a unique value (or
zeros) assigned to each slot.
If the MODE field is set to AUTO, the PGM field is non-editable and it displays the
assigned program.
With MODE set to Manual, use this field to specify the MPEG program number to
decrypt for each slot numbered 0 - 3. If the MPEG program number is not
available, the DSR-6000 inserts parentheses around the value. Use the 56
buttons to scroll through all available known MPEG programs in the current
transport stream. Use the CLEAR value to remove a program and thus clear the
decryption slot. This field also provides a second method for selecting the MPEG
program. Use the 34 buttons to select the digit to change and then, while the
cursor is on that digit, press the 56 buttons to display the required value. Repeat
this process for each applicable digit.
This non-editable field displays the authorization state of the service that is selected
in the PGM field. This field displays one of the following states:
AU
Authorized
NA
Not Authorized
--
No authorization information is available for the specified service.
DECRYPT SETUP
MODE
E
AUTO
Default: AUTO
Default: 0
Default: 00000
NO PGM
AS
0
00000
--
Advertisement
Table of Contents
