Id Field; Mode Field; Sat Field; Polar Field - Motorola DSR-6000 Operator's Manual

ID Field

Use this field to choose which port to configure. Press the 4 button until the cursor
is at the ID field, then use the 56 buttons to choose a port (1-8). Press the ENTER
button to confirm the selection and exit the field.

Mode Field

Use the Mode field to select the mode for port setup. Press the 4 button until the
cursor is at the Mode label, and press the ENTER button to move into the field.
Press the 56 buttons to view the desired mode. There are two options: Manual
and Auto. Press the ENTER button to exit.

Sat Field

Use this field to select a satellite name, when the Manual option in the Mode field
is selected.
Press the 4 button until the cursor is at the Satellite label. Press the ENTER button
to enter this field, use the 34 buttons to select the character position to be changed.
Then use the 56 buttons to scroll through the character choices. Press the
ENTER button to confirm selection and exit the field.
This field displays the satellite to which the port is related and is not editable when
the AUTO option in the Mode field is selected. This field displays dashes (---)
when the port is not related to a satellite.

Polar Field

Use this field to select a polarity when the Manual option in the Mode field is
selected. Press the 4 button until the cursor is at the Polar label. Press the ENTER
button to enter this field and press the 56 buttons to display the options: H/LHP
(Horizontal/Left-Hand Polarity) or V/RHP (Vertical/Right-Hand Polarity). Select a
polarity and press ENTER to exit the field.
Default: 1
Default: AUTO
Default: ---
Default: ---
19