Table of Contents
Advertisement
3
DR Menu (Acquisition Recovery)
MODE Field
VCT (Virtual Channel Table) Field
VCN (Virtual Channel Network) Field
PORT Field
30
Use this menu to review the Acquisition Recovery map. This menu is used most
commonly in troubleshooting. Press the 56 buttons until the DR menu appears.
DR
This non-editable field displays the DR mode (either Disabled or Channel).
This non-editable field displays the Acquisition Recovery map's Virtual Channel Table
(VCT) number (0 to 65535) that is currently specified by the Uplink Programmer
(BNC). If the VCT is not available, the VCT number is enclosed in parenthesis.
If this field displays ----, the field in non-editable, and no channels are available for
selection.
Use this field only to view the configuration of each channel's port. If the PORT
field displays Not Defined, this means the channel's port is not configured.
This non-editable field displays one of the following three messages:
NA
The VCT is either not available or set to (00000).
Not Defined
The DSR-6000 is not available to map a VCT or a configured port.
This means the channel's port is not configured.
1,X0(20),H
Input port number (1-8) that is associated with the specified
channel (followed by a comma).
Satellite name.
Satellite ID within brackets (followed by a comma).
Polarity specified with either H (for Horizontal) or V (for Vertical).
MODE
VCT
VCN
Disabled
(00000)
----
PORT
NA
Advertisement
Table of Contents
