62 Installing Secure Router 4134 hardware components
•
•
Procedure steps
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Ensure the Secure Router 4134 has the power switched off.
Ensure you have an antistatic bag or sheet available for the VPN/IPSec
that you are removing.
Action
Remove the two screws at the rear of the Secure Router 4134 that
hold the service access panel secure. Remove these two screws
only. See the following figure.
Slide the access panel toward you until it is clear of the Secure
Router 4134.
Remove the two screws that secure the VPN/IPSec module to the
Main Board (see the following figure).
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 01.02 Standard
10.0 7 August 2007