Subscribe to Our Youtube Channel
Related Manuals for Daktronics SPORTSOUND 1500HD GEN II
Summary of Contents for Daktronics SPORTSOUND 1500HD GEN II
- Page 1 SPORTSOUND 1500HD GEN II ® AUDIO SYSTEM INSTALLATION MANUAL P1534 DD5106172 Rev 00 21 December 2022 201 Daktronics Drive Brookings, SD 57006-5128 www.daktronics.com/support 800.325.8766...
- Page 2 Daktronics trademarks are property of Daktronics, Inc. All other trademarks are property of their respective companies.
-
Page 3: Table Of Contents
Table of Contents Introduction ���������������������������������������������������������������������������������������������������������������������������1 Important Safeguards ..........................1 Resources ..............................1 Daktronics Nomenclature ........................2 Sound System Components ������������������������������������������������������������������������������������������������3 Equipment Overview ...........................3 Sound Cabinet ............................3 Grille���������������������������������������������������������������������������������������������������������������������������������������������������3 Drivers ������������������������������������������������������������������������������������������������������������������������������������������������3 Control Enclosure..........................4 Fiber Conversion Box ..........................4 Audio Control Rack ..........................4 Signal Cables ............................4 Mechanical Installation �������������������������������������������������������������������������������������������������������5 Cabinet Installation ..........................5... - Page 4 Replacement Parts ..........................21 Sound Cabinet ��������������������������������������������������������������������������������������������������������������������������������21 Control Enclosure ���������������������������������������������������������������������������������������������������������������������������21 Fiber Conversion Box ���������������������������������������������������������������������������������������������������������������������21 Daktronics Exchange and Repair & Return Programs ����������������������������������������������������22 Exchange Program ..........................22 Repair & Return Program ........................23 Daktronics Warranty & Limitation of Liability ...................23 A Reference Drawings �����������������������������������������������������������������������������������������������������������25 Daktronics Warranty &...
-
Page 5: Introduction
® 1500HD Audio System. For additional information regarding safety, installation, operation, or service, refer to the telephone numbers listed in Section 7: Daktronics Exchange and Repair & Return Programs (p�22). This manual is not specific to a particular installation. Important Safeguards Read and understand all instructions before beginning the installation process�... -
Page 6: Daktronics Nomenclature
Materials (BOM) for the project. If a component is not found in the Replacement Parts (p�21), use the label to order a replacement. Figure 2: Part Label Refer to Section 7: Daktronics Exchange and Repair & Return Programs (p�22) if replacing or repairing any component. Accessory Labels... -
Page 7: Sound System Components
Sound System Components Equipment Overview The Sportsound 1500HD audio system consists of the following elements: • Sound Cabinet • Control Enclosure Note: All products in this system are tested individually for product safety approval. • Fiber Conversion Box • Audio Control Rack •... -
Page 8: Control Enclosure
Cable specifications are as follows: • Minimum 2-core, multimode 50-micron fiber optic cable from fiber conversion box to control enclosure. If included with a Daktronics scoreboard or display, the sound system may share a fiber optic cable run, requiring additional cores. •... -
Page 9: Mechanical Installation
Daktronics assumes no responsibility for system damage or injury resulting from installation methods that deviate from attachment details specified on shop drawings. Daktronics also assumes no liability for system damage or injury resulting from incorrect setup or lifting methods performed by non-Daktronics employees. -
Page 10: Mount The Cabinet
Figure 10. Figure 10: Eyebolt Plane Load Note: Daktronics assumes no liability for damages resulting from incorrect setup or lifting methods. Eyebolts are intended for lifting only. Do not attempt to permanently support the cabinet by the eyebolts or eyebolt holes. -
Page 11: Mounting The Control Enclosure
Mounting the Control Enclosure Reference Drawings: Mtg Detail; SS Control Encl Beam Clamp ............DWG-1131068 Tools Required: 1/2" & wrench/socket, 3/4" wrench/socket Note: Installation described below requires I-beams with 3/16" to 3/4" thick beam flanges. If an alternate mounting option for control enclosure is preferred, it is the responsibility of the installer to adequately secure the enclosure to the base structure. -
Page 12: Electrical Installation
Electrical Installation CAUTION – RISK OF ELECTRIC SHOCK: Only qualified individuals should perform power routing and termination to the system. It is the responsibility of the electrical contractors to ensure that all electrical work meets or exceeds local and national codes. Failure to follow installation guidelines will result in audible noise on the sound system and possible damage to internal components. -
Page 13: Power
A minimum of 2-core, multimode 50-micron fiber optic cable must be run in conduit from the fiber conversion box location to the sound cabinet control enclosure (FPP2). Refer to Detail “D” of DWG-5115728. If included with a Daktronics scoreboard or display, the sound system may share a fiber optic cable run, requiring additional cores. -
Page 14: Grounding
– must be electrically grounded. Only qualified individuals may perform electrical work, including verification of ground resistance. Daktronics is not responsible for improper grounding or damage incurred as a result of improper grounding. Grounding methods must meet the provisions of all applicable local and national codes. - Page 15 Analog Backup - SWT2 (To Control Enclosure) POE Switch (A-5110612) Converter (A-5114319) Fiber Splice Point - FPP1 (To Control Enclosure) Power Supply (A-5099220) Side View Front View Figure 15: Internal Fiber Conversion Box Connections & Components (Cover Open) Electrical Installation...
-
Page 16: Maintenance
If the grille mesh fades or tears over time, or if new graphics/logos are desired, it may be replaced. Only qualified sign companies should be used to replace the grille mesh. Refer to DWG-983304 for mesh layout. Contact Daktronics for mesh reordering. 1� Remove Mesh Frame The front of the sound cabinet has a removable aluminum frame that secures the grille mesh. - Page 17 Figure 17: Removing Tension Clips 3� Attach New Mesh When ordered through Daktronics, the mesh has a line with a series of tick marks printed on the front as shown in Figure 18. These tick marks indicate the location of the tension clips and mandrels.
- Page 18 d� Continue to place a mandrel and tension clip on every tick mark. e� Lay the mesh across the frame and snap each clip into the tension channels. Refer to Figure 21. f� Pull on the corners of the mesh to remove any wrinkles.
-
Page 19: Control Enclosure Maintenance
Control Enclosure Maintenance Performing preventative maintenance will ensure proper air circulation to internal components. How much maintenance is required depends on the surrounding environment. Filters One filter is located on the inside bottom door panel, as shown in Figure 23, and another filter is located in the hood above the door panel. -
Page 20: Troubleshooting
Refer to the Isolation Transformer Isolation transformer failure (ANALOG BACKUP enabled) Troubleshooting Guide (DD3417357), located online at www.daktronics.com/manuals. Open Dante controller and Muffled audio from cabinet Bad digital connection check for errors. (but clear though headphones... -
Page 21: Indicator Lights
Audio System Humming Ground loop cabinet Troubleshooting (DD3448287), located online at www.daktronics.com/manuals. For more troubleshooting steps, refer to the appropriate audio control rack manual. Indicator Lights Control Enclosure There is a green LED power indicator on the bottom of the control enclosure as shown in Figure 25. -
Page 22: Driver Troubleshooting
Driver Troubleshooting Tools Required: Multi-meter, 9V battery To access the driver, follow Steps 1–2 in the appropriate driver type section under Driver Replacement (p�18). Before removing the driver, verify correct DC resistance of the driver using a multi-meter. Refer to Figure 26. Check the DC resistance of each driver separately, or check the DC resistance at the harness. -
Page 23: Mid-Frequency Driver (A-2305)
a� Disconnect wires, if not already done. b� Remove 4 threaded studs with the 10mm wrench. c� Pull off the bad driver. Refer to Figure 27. 5� Install replacement driver: a� Hand tighten shorter threaded end of studs into driver. b�... -
Page 24: Low-Frequency Driver (A-2306)
Low-Frequency Driver (A-2306) Tools Required: flathead screwdriver, 5/32 Allen wrench, 3/16 Allen wrench, utility knife, silicone 1� Remove the left-most rear access door using the flathead screwdriver. 2� Remove the internal speaker cabinet’s back panel: a� If there is a silicone seal, cut it with a utility knife. -
Page 25: Replacement Parts
Fiber Conversion Box Description Part Number 48 VDC Power Supply A-5099220 POE Switch A-5110612 SFP Transceiver A-5110614 Converter; Analog to Dante A-5114319 Refer to Section 7: Daktronics Exchange and Repair & Return Programs (p�22) for information on exchanging or returning parts. Troubleshooting... -
Page 26: Daktronics Exchange And Repair & Return Programs
Fill out and attach the enclosed UPS shipping document. c� Ship the part to Daktronics. 3� The defective or unused parts must be returned to Daktronics within 5 weeks of initial order shipment� If any part is not returned within five (5) weeks, a non-refundable invoice will be presented to the customer for the costs of replenishing the exchange parts inventory with a new part. -
Page 27: Repair & Return Program
Repair & Return Program For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a part for repair, follow these steps: 1� Call Daktronics Customer Service� United States & Canada: 1-800-DAK-TRON (325-8766) Outside the U.S. & Canada: +1-605-275-1040 2�... - Page 28 This page intentionally left blank.
-
Page 29: A Reference Drawings
Mtg Detail; SS Control Encl Beam Clamp ............DWG-1131068 Schematic; Control Enclosure 1500HD 120VAC ........... DWG-5103751 SCH; Sportsound 1500 Speakers To Term Block ..........DWG-5106214 System Riser; 1500HD ..................DWG-5115728 Audio; Sportsound, Fiber Box Sch, w/o Router ..........DWG-5136262 Daktronics Exchange and Repair & Return Programs... - Page 30 This page intentionally left blank.
- Page 31 ALUMINUM PANELS ATTACHED INSTALLATION IS COMPLETE. CUSTOMER. ON SIDES AND BACK. 1.0 REFERENCE 1.1 REFER TO DAKTRONICS RISER DIAGRAM FOR ALL ELECTRICAL 8'-0" POWER AND DATA SPECIFICATIONS. [2438mm] 1.2 THE SHOWN SYSTEM MUST BE APPROVED BY THE CUSTOMER OVERALL WIDTH...
- Page 33 REQUIRMENTS. THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE BROOKINGS, SD 57006 EXPRESSED WRITTEN CONSENT OF DAKTRONICS, INC. 4 JUN 12 ADDED MESH PART NUMBER AND REV TO DRAWING COPYRIGHT 2011 DAKTRONICS, INC. DO NOT SCALE DRAWING...
- Page 35 THIRD ANGLE PROJECTION ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF 1/2 - 13 X 3.00 BOLT @4 DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) DAKTRONICS AUDIO PROJECT: MTG DETAIL;...
- Page 36 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2022 DAKTRONICS, INC. (USA) CHANGED FIBER PATCH AND CABLE.
- Page 37 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2022 DAKTRONICS, INC. (USA) SPORTSOUND SYSTEMS PROJECT: SCH;...
- Page 38 ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY AMP2 LF2+ GRN A314 ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. 10: AMP2 LF2- BLK A314 COPYRIGHT 2022 DAKTRONICS, INC. (USA) REMOVED 230V OPTIONS AND CORRECTED FIBER BOX PART...
- Page 39 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. NOTES: COPYRIGHT 2022 DAKTRONICS, INC. (USA) INSTALL A-5110614 IN SFP SLOT...
- Page 40 This page intentionally left blank.
-
Page 41: B Daktronics Warranty & Limitation Of Liability
Daktronics Warranty & Limitation of Liability This section includes the Daktronics Warranty & Limitation of Liability statement (SL-02374)� Daktronics Exchange and Repair & Return Programs... - Page 42 This page intentionally left blank.
- Page 43 Warranty Coverage. Daktronics warrants to the original end user (the “End User”, which may also be the Purchaser) that the Equipment will be free from Defects (as defined below) in materials and workmanship for a period of one (1) year (the “Warranty Period”). The Warranty Period shall commence on the earlier of: (i) four weeks from the date that the Equipment leaves Daktronics’...
- Page 44 In no event shall Daktronics be liable for loss, damage, or injury of any kind or nature arising out of or in connection with this Warranty in excess of the Purchase Price of the Equipment. The End User’s remedy in any dispute under this Warranty shall be ultimately limited to the Purchase Price of the Equipment to the extent the Purchase Price has been paid.
- Page 45 For End User’s protection, in addition to that afforded by the warranties set forth herein, End User may purchase extended warranty services to cover the Equipment. The Extended Service Agreement, available from Daktronics, provides for electronic parts repair and/or on-site labor for an extended period from the date of expiration of this warranty. Alternatively, an Extended Service Agreement may be purchased in conjunction with this Warranty for extended additional services.
- Page 46 This page intentionally left blank.
Need help?
Do you have a question about the SPORTSOUND 1500HD GEN II and is the answer not in the manual?
Questions and answers