Related Manuals for Daktronics SPORTSOUND SSN-250
Summary of Contents for Daktronics SPORTSOUND SSN-250
- Page 1 SPORTSOUND INDOOR SSN-250 AUDIO SYSTEM INSTALLATION MANUAL P1756 DD3580600 Rev 00 01 April 2019 201 Daktronics Drive Brookings, SD 57006-5128 www.daktronics.com/support 800.325.8766...
- Page 2 Daktronics trademarks are property of Daktronics, Inc. All other trademarks are property of their respective companies.
-
Page 3: Table Of Contents
Equalization & Vertical Coverage ������������������������������������������������������������������������������������������������13 Amplifier Indicators ������������������������������������������������������������������������������������������������������������������������13 Replacement Parts �������������������������������������������������������������������������������������������������������������14 Sound Cabinet Components ......................14 Control Components .........................14 Daktronics Exchange and Repair & Return Programs ����������������������������������������������������15 Exchange Program ..........................15 Repair & Return Program ........................16 Daktronics Warranty & Limitation of Liability ...................16 – i –... - Page 4 Table of Contents A Reference Drawings �����������������������������������������������������������������������������������������������������������17 Supplementary Manuals ����������������������������������������������������������������������������������������������������27 C Daktronics Warranty & Limitation of Liability ��������������������������������������������������������������������29 – ii –...
-
Page 5: Introduction
Reference Drawing: System Riser Diagram ..................DWG-1007804 Daktronics identifies manuals by the DD or ED number located on the cover page. Daktronics has a searchable knowledgebase of common questions and troubleshooting tips: www.daktronics.com/support. -
Page 6: Daktronics Nomenclature
2465 component is not found in Section 6: Replacement Parts (p�14), 02/19/12 Rev. 1 use the label to order a replacement. Refer to Section 7: Daktronics Exchange and Repair & Return Programs (p�15) if replacing or Figure 2: Part Label repairing any component. -
Page 7: Sound System Components
Sound System Components Equipment Overview The Sportsound indoor audio system consists of the following elements: • Speaker Cluster • Control Enclosure • Source Equipment • Signal Cables Speaker Cluster The SSN-250 speaker cluster consists of two line array column speakers for seating coverage, two monitor speakers for court coverage, and one low frequency driver all suspended above center court (Figure 3). -
Page 8: Drivers
Drivers Five different types of drivers are used in the SSN-250 speaker cluster: • 1" (25 mm) soft dome tweeters @32 • 5" (125 mm) high-power drivers @16 • 12" (305 mm) low frequency driver @1 • 8" (203 mm) low frequency drivers @2 •... -
Page 9: Amplifier
• Short circuit, open circuit, thermal, RF protection Source Equipment The Sportsound indoor sound cabinet is compatible with all Daktronics standard control systems. Refer to the manual provided with the control system for proper operation. Signal Cables Cable specifications are as follows: •... -
Page 10: Mechanical Installation
(p�6). With the subwoofer unit securely fastened to the roof/truss structure, attach the Court Fill speakers followed by the Home and Visitor column speakers. Note: Daktronics assumes no liability for damages resulting from incorrect setup or lifting methods. Eyebolts are intended for lifting only. Do not attempt to permanently support the speaker cluster with the eyebolts or eyebolt holes. -
Page 11: Rigid Attachment Method
Rigid Attachment Method Reference Drawing: Shop Dwg; SSN-250; Rigid Attachment Method ........... DWG-3394171 Refer to DWG-3394171 in Appendix A for rigid attachment mounting guidelines. Note: This mounting method requires trusses running down the center of the gym, parallel to the length of the court. Aiming Reference Drawing: Mech. -
Page 12: Electrical Installation
Electrical Installation CAUTION – RISK OF ELECTRIC SHOCK: Only qualified individuals should perform power routing and termination to the system. Electrical contractors are responsible for ensuring that all electrical work meets or exceeds local and national codes. Failure to follow installation guidelines will result in audible noise on the sound system and possible damage to internal components. -
Page 13: Power
– must be electrically grounded. Only qualified individuals may perform electrical work, including verification of ground resistance. Daktronics is not responsible for improper grounding or damage incurred as a result of improper grounding. Grounding methods must meet the provisions of all applicable local and national codes. -
Page 14: Speaker Line Out To Cluster
Speaker Line OUT to Cluster Connect 1 pair, 12 AWG speaker cable (part # W-1561) from each amplifier output in the audio junction box to a corresponding speaker input using fork connectors (part # E-1078). There will be a total of seven (7) wire pair connections as shown below and in DWG-3822601: Output &... -
Page 15: Troubleshooting
If individual components fail to work, refer to troubleshooting sections in the manufacturers’ manuals. If the problem persists, contact Daktronics for assistance. Note: Be sure to power on the announcer’s rack and cabinet breakers. Make sure all connections from source to the cabinet are complete. - Page 16 + WHT b� If measurements do not match, this indicates a bad crossover board within 2.95 2.95 Ohms Ohms - GRN speaker cabinet. Contact Daktronics to replace the faulty speaker. Ohms - GRN Ohms Ohms + YEL Each + YEL 2.95...
-
Page 17: Test Tones
If all tones are present, the drivers are connected and operating properly. If any test tones do not play, the driver(s) may need to be replaced. Contact Daktronics. Equalization & Vertical Coverage SSN-250 systems have two small selector switches on the side of the main vertical speakers (Figure 12). -
Page 18: Replacement Parts
Junction Box; 12 position A-3551392 Amplifier; QSC, CXD4.3 A-3812143 Signal Input Plate, XLR EC-1244 Transformer; Audio Input, 1 Channel, Isolation Module T-1130 Refer to Section 7: Daktronics Exchange and Repair & Return Programs (p�15) for information on exchanging or returning parts. Replacement Parts... -
Page 19: Daktronics Exchange And Repair & Return Programs
Fill out and attach the enclosed UPS shipping document. c� Ship the part to Daktronics. 3� The defective or unused parts must be returned to Daktronics within 5 weeks of initial order shipment� If any part is not returned within five (5) weeks, a non-refundable invoice will be presented to the customer for the costs of replenishing the exchange parts inventory with a new part. -
Page 20: Repair & Return Program
Repair & Return Program For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a part for repair, follow these steps: 1� Call or fax Daktronics Customer Service� Refer to the appropriate number in the chart on the previous page. - Page 21 Reference Drawings Refer to Resources (p�1) for information regarding how to read the drawing number. Any contract-specific drawings take precedence over the general drawings. Reference Drawings: Mech. Installation; SSN-250 ................DWG-1200806 Assy; Step 1-3; SSN-250 ..................DWG-3391990 Shop Dwg; SSN-250; Suspension Method ............DWG-3393643 Shop Dwg;...
- Page 22 This page intentionally left blank.
- Page 23 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. THESE HOLES CAN BE USED IF ISOMETRIC VIEW COPYRIGHT 2016 DAKTRONICS, INC.
- Page 24 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY REAR ISO VIEW ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) NOTE: DAKTRONICS AUDIO SYSTEMS...
- Page 25 SUBCONTRACTOR TO ENSURE THAT THE CABLE DOES NOT MOVE PERFORMED BY EXPERIENCED RIGGING PERSONNEL. ON THE TRUSS. 2. DAKTRONICS ASSUMES NO LIABILITY IN SUSPENSION SYSTEM INSTALLED OR DESIGNED BY OTHERS. 3. OWNER IS RESPONSIBLE FOR VERIFYING THAT THE BUILDING ROOF STRUCTURE CAN SAFELY SUPPORT THE SPEAKER CLUSTER LOAD IN ACCORDANCE WITH ALL APPLICABLE STATE AND LOCAL BUILDING CODES.
- Page 26 PERFORMED BY EXPERIENCED RIGGING PERSONNEL. HC-1095 WASHER; 1/2", FLAT, ZINC INDEX NAME HC-1152 BOLT; 1/2"-13 X 1.50", G5, ZINC 2. DAKTRONICS ASSUMES NO LIABILITY FOR IMPROPER INSTALLATION 1199952-B OF SPEAKER SYSTEM INSTALLED BY NON-DAKTRONICS PERSONNEL. HC-1570 NUT; 1/2"-13, NYLON LOCK, ZINC 1199962-A HC-1572 TEK SCREW;...
- Page 27 JB 2 SINGLE GANG XLR PLATE, J-BOX BY OTHERS. EC-1244 DAKTRONICS INSTALL SUB · INSTALLATION SUBCONTRACTOR MAY BE HIRED THROUGH DAKTRONICS OR CUSTOMER. REFER TO PROJECTS IR CHECKLIST FOR JB 3 JUNCTION BOX; SPEAKER CABLE A-3551392 DAKTRONICS INSTALL SUB FURTHER CLARIFICATION OF INSTALLATION RESPONSIBILITIES.
- Page 28 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING THIRD ANGLE PROJECTION ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2017 DAKTRONICS, INC. (USA) - 20 AMP 120 VAC CIRCUIT SPORTSOUND SYSTEMS PROJECT: F.
- Page 29 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2018 DAKTRONICS, INC. (USA) SPORTSOUND SYSTEMS PROJECT: SSN-250;...
- Page 30 This page intentionally left blank.
- Page 31 • When viewing a digital copy of this manual from www.daktronics.com/manuals, click on the appropriate manufacturer link below to view a component’s manual. If the link is broken, visit the manufacturer’s website or perform a web search for the component model number.
- Page 32 This page intentionally left blank.
- Page 33 Daktronics Warranty & Limitation of Liability This section includes the Daktronics Warranty & Limitation of Liability statement (SL-02374)� Daktronics Exchange and Repair & Return Programs...
- Page 34 This page intentionally left blank.
- Page 35 EXCEPT AS OTHERWISE EXPRESSLY SET FORTH IN THIS WARRANTY, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, DAKTRONICS DISCLAIMS ANY AND ALL OTHER PROMISES, REPRESENTATIONS AND WARRANTIES APPLICABLE TO THE EQUIPMENT AND REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ACCURACY OR QUALITY OF DATA. OTHER ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY DAKTRONICS, ITS AGENTS OR EMPLOYEES, SHALL NOT CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY IS NOT TRANSFERABLE. 2. Exclusion from Warranty Coverage This Warranty does not impose any duty or liability upon Daktronics for any: A. damage occurring at any time, during shipment of Equipment unless otherwise provided for in the Agreement. When returning Equipment to Daktronics for repair or replacement, End User assumes all risk of loss or damage, agrees to use any shipping containers that might be provided by Daktronics, and to ship the Equipment in the manner prescribed by Daktronics; B. damage caused by: (i)the improper handling, installation, adjustment, use, repair, or service of the Equipment,or (ii) any physical damage which includes, but is not limited to, missing, broken, or cracked components resulting from non‐electrical causes; altered, scratched, or fractured electronic traces; missing or gauged solder pads; cuts or clipped wires; crushed, cracked, punctured, or bent circuit boards; or tampering with any electronic connections, provided that such damage is not caused by personnel of Daktronics or its authorized repair agents; C. damage caused by the failure to provide a continuously suitable environment, including, but not limited to: (i) neglect or misuse; (ii) improper power including, without limitation, a failure or sudden surge of electrical power; (iii) improper air conditioning, humidity control, or other environmental conditions outside of the Equipment’s technical specifications such as extreme temperatures, corrosives and metallic pollutants; or (iv) any other cause other than ordinary use; Copyright © Daktronics, Inc. SL-02374 Rev 12 19Nov15 Page 1 of 2...
- Page 36 Limitation of Liability Daktronics shall be under no obligation to furnish continued service under this Warranty if alterations are made to the Equipment without the prior written approval of Daktronics. It is specifically agreed that the price of the Equipment is based upon the following limitation of liability. In no event shall Daktronics (including its subsidiaries, affiliates, officers, directors, employees, or agents) be liable for any claims asserting or based on (a) loss of use of the facility or equipment; lost business, revenues, or profits; loss of goodwill; failure or increased cost of operations; loss, damage or corruption of data; loss resulting from system or service failure, malfunction, incompatibility, or breaches in system security; or (b) any special, consequential, incidental or exemplary damages arising out of or in any way connected with the Equipment or otherwise, including but not limited to damages for lost profits, cost of substitute or replacement equipment, down time, injury to property or any damages or sums paid to third parties, even if Daktronics has been advised of the possibility of such damages. The foregoing limitation of liability shall apply whether any claim is based upon principles of contract, tort or statutory duty, principles of ...