Ac Power Cord Specifications - Cisco Catalyst 9300 Series Hardware Installation Manual

AC Power Cord Specifications

Power Requirements
Specification
Input current
Output ratings
Input voltage range domestic
Voltage range international
Total input BTU
Total output BTU
Wire gauge for ground connection
Branch circuit protection
8
Table 45: Fan Module Environmental and Physical Specifications
Environmental Ranges
Operating temperature
Storage temperature
Relative humidity
Altitude
Physical Specification
Dimensions (H x D x W)
Weight (for three fans)
Operating Specification
Airflow
AC Power Cord Specifications
The following table lists the specifications for the AC power cords that are available for the AC-input power
supplies.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
118
8
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on -40 VDC.
23 to 176°F (–5 to 80°C)
–40 to 185°F (–40 to 85°C) up to 15,000 ft (4500 m)
5 to 95% (non-condensing)
Up to 13,000 ft (4000 m)
1.62 x 1.73 x 4.24 in. (4.11 x 4.39 x 10.76 cm)
0.48 lb (0.21 kg)
20 cfm
PWR-C1-715WDC
24–12 A
-56 V at 12.8 A
–36 VDC (minimum), –48 VDC (nominal), –72 VDC
(maximum)
–36 VDC (minimum), –48 VDC (nominal), –72 VDC
(maximum)
PWR-C1-715WDC: 2777 BTUs per hour, 715 W
2440 BTUs per hour
12 AWG or 8 AWG
20 A
Technical Specifications