NEC NP-NC900C-A Service Manual page 56

KEY PART REPLACEMENT (Method of disassembly/Photo taken from life)
1-4 Left Inside / Lamp Door / Right Outside / Right Inside Cover & Lamp Door Switch
Loosen 7 screws and take the right outside
cover off. Torque: 7~8 kgf.cm. Take off the
Bracket. Torque: 1.25~1.75 kgf-cm.
Loosen 3 screws on right outside cover
and take the right outside cover off.
Torque: 7~8 kgf-cm
Put right inside cover on the desk.
"Confidential, Do Not Duplicate without written authorization from NEC."
Loosen 2 screws and take the Lamp door
cover off. Torque: 7~8 kgf-cm
Loosen 12 screws on right inside cover and
take the right outside cover off.
Torque: 7~8 kgf-cm.
Loosen 2 screws on right inside cover and take the
Lamp door switch off. Torque: 1.5~2 kgf-cm.
5-5