Technical Data; Entrapment Protection - D+H ZA35-BSY+(-HS) Manual

Technical data

Type
Nominal voltage
Nominal current
Nominal force
Nominal locking force
Lifetime
Duty cycle
Housing
Ingress protection
Temperature range
Fire stability
Nominal stroke length* See type plate
Additional functions *
* Programmable with software Service and Configuration Suite BSY+ (SCS)
Running speed
and forces
Normal operation =
SHEV- fast running =
Forces ZA 35 ZA 85
OPEN 300 N
67.44 lbf 179.8 lbf
CR III 300 N
67.44 lbf 179.8 lbf
CR II 300 N
67.44 lbf 179.8 lbf
CR I 300 N
67.44 lbf 179.8 lbf

Entrapment protection

The drives were not evaluated for
entrapment protection.
In "CLOSE" direction the drive has an active
clamping protection for the main closing edge. With
an overload in the closing range 3 and 2 the drive
runs "OPEN" for 10 seconds, then drive "CLOSE"
again. If after three attempts a closing is not possible,
the drive remains in this position.
In addition, the drive has a passive clamping
protection. The closing speed in closure Range 2
and 1 is reduced to 5 mm/s (0,2"/s). The drive were
not evaluated for entrapment protection.
99.824.48 2.3/03/22
ZA 35-BSY+(-HS)
24 V DC, ±15 %
0,5 A (1,2 A)
300 N / 67.44 lbf
1100 N / 247.3 lbf
>10 000 double strokes
30 % (with cycle time 10 min.)
Anodized aluminium / polycarbonate
IP 65 ("-W" = IP 54)
-5 ... +75 °C (23 ... 167 °F)
30 min / 300 °C (572 °F)
Closing edge protection activated (3 stroke repeatings)
ZA 105 ZA 155
800 N 1000 N
224.8 lbf 337.2 lbf
800 N 1000 N
224.8 lbf 224.8 lbf
800 N 1000 N
224.8 lbf 224.8 lbf
800 N 800 N
179.8 lbf 179.8 lbf
(see N.12 of Safety Notes; p 2/12)
ZA 85-BSY+(-HS) ZA 105-BSY+(-HS)
24 V DC, ±15 % 24 V DC, ±15 %
1,0 A (2,0 A) 1,2 A (2,2 A)
800 N / 179.8 lbf 1000 N / 224.8 lbf 1500 N / 337.2 lbf
1500 N
1000 N
1000 N
All forces + approx. 20 % switch-off reserve
800 N
(temporary)
Main closing edge
English
ZA 155-BSY+(-HS)
24 V DC, ±15 %
1,4 A (2,5 A)
Higher forces can occur
on besides closing edges.
Danger of violent pressure
in handaccessible area.
3/12
RDM -BSY+ (-HS)