Installing The Canopy - Toro 07921 Installation Instructions Manual

9

Installing the Canopy

Parts needed for this procedure:
1 Canopy
4 Flange-head bolt (1/4 x 1-3/4 inches)
4 Sealing washer
4 Locknut (1/4 inch)
Procedure
Important:
If you are installing a mirror kit, install it before installing the canopy.
Secure the canopy to the front and rear mounting tubes using 4 flange-head bolts (1/4 x 1-3/4 inches), 4 sealing
washers, and 4 locknuts (1/4 inch) as shown in
1. Sealing washer
2. Locknut (1/4 inch)
Figure 15.
Figure 15
2-person canopy shown
3. Canopy
4. Flange-head bolt (1/4 x 1-3/4 inches)
9
g259844