Toro 07921 Installation Instructions Manual page 4

8. Remove the 2 flange-head bolts securing the
battery tray to the frame
1. Flange-head bolt
2. Self-tapping screw
9. Remove the 4 screws securing the right side
panel to the lower seat assembly
For Electric Machines
Important:
Before performing this procedure,
check your machine to see if the holes for
installation already exist. If not, proceed with this
procedure.
Note:
Retain all the hardware that you remove in this
procedure.
1. Remove the 4 self-tapping screws securing the
right side panel to the machine
(Figure 8).
Figure 8
3. Right side panel
(Figure
(Figure
1. Right side panel
g033999
2. Remove the 2 bolts securing the charger bracket
to the battery tray
8).
9).
1. Left side panel
2. Self-tapping screw
3. Remove the 4 self-tapping screws securing the
left side panel to the machine
4
Figure 9
2. Self-tapping screw
(Figure 10).
Figure 10
3. Bolt
(Figure 10).
g035126
g035124