Advertisement
2.
Secure the canopy support tube to the long canopy support brackets using 4 flange-head bolts (1/4 x
1-1/4 inches) and 4 locknuts (1/4 inch) as shown in
1. Long canopy support bracket
2. Flange-head bolt (1/4 x 1-1/4 inches)
3.
Using the canopy support tube as the template, drill 2 holes (6 mm or 1/4 inch) into the canopy.
4.
Secure the canopy support tube to the canopy using 2 flange-head bolts (1/4 x 1-1/2 inches), 2 sealing
washers, and 2 locknuts (1/4 inch) as shown in
1. Locknut (1/4 inch)
2. Sealing washer
Figure
19.
Figure 19
3. Locknut (1/4 inch)
4. Canopy support tube
Figure
20.
Figure 20
3. Flange-head bolt (1/4 x 1-1/2 inches)
4. Canopy support tube
13
g262068
g261161
Advertisement
