Go to Settings > Taskbar > Start Menu Programs > Advanced and
delete the Bay Networks Remote Annex programs.
3.
Go to the File Manager or Explorer and delete the following files/
directories:
Delete the installation directory c:WIN32APP\BayNet\RAnnex and
its files.
Delete the installation backup directory
c:WIN32APP\BayNet\RAnnex.bak and its files.
Delete the directory c:\bfs and its files.
Delete the directory c:\etc and its files.
4.
Reboot the system.
Known Problems/Limitations
•
You should halt all erpcd processes running in debug mode
prior to installing Remote Annex Server Tools for
Windows NT.
•
Installing Remote Annex Server Tools for Windows NT on a
system that has erpcd running causes the following error:
An application error has occurred and an application
log is being opened erpcd.exe
Exception: access violation (0xc0000005), Address:
0x004152276
•
In order to run the erpcd authentication function under debug
mode, you need special privileges. Use "Act as operation
system" from the Windows NT user manager to resolve the
problem.
•
You must use care when transferring acp_files, etc. from
UNIX hosts to Windows NT hosts, because the end-of-line
characters are different. To avoid this problem, use a utility
such as unix2dos (available on the World Wide Web).
Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
89