Table of Contents
Advertisement
de
Signal setting
6th
Rinse the lint under flowing
the warm water.
7th
Dry the lint filters, fold them shut
and put the two-part lint filter back
in.
Caution!
The dryer can be damaged.
Do not operate the dryer without a fluff
filter or with a defective fluff filter.
28
M.
Signal setting
You can change the following settings:
SIGNAL ADJUSTMENT
The spin speed at which the washing
■
machine was spun; exclusively for a
more precise display of the expected
drying time,
the volume for the signal at the end of
■
the program,
the volume for the key signals.
■
To change the settings, you must always
activate the setting mode first.
Activate setting mode
1.
Turn on the dryer.
2.
Select the cotton program in position
1 and wait 5 seconds.
The setting mode is now activated, the
symbols go out in the display panel and
the program duration appears.
1.
Press the start button, hold it down and
at the same time turn the program
selector clockwise to position 2.
2.
The value for the appears in the display
Spin speed.
3.
Change the spin speed by selecting
the button for the Ready in time or
the button for the drying time.
4th
Turn the program selector
clockwise to position 3.
5.
The volume appears in the display
for the Signal at the end of the program.
Advertisement
Table of Contents
