Table of Contents
Advertisement
Signal setting
en
Pour out the condensation water.
2.
Caution!
Dirty condensation water may be
harmful to your health and cause
material damage.
Condensation water is not suitable
for drinking and may be
contaminated with fluff. Do not drink
the condensation water or reuse it.
Push in the condensate container
3.
until you feel it lock back into place
in the dryer.
The filter in the condensate
Note:
container filters the condensation which
is used during the dryer's automatic
cleaning cycle. The filter is cleaned by
emptying the condensation.
Nevertheless, you should check the
filter regularly for remaining deposits
and remove them. See ~ Page 33.
30
M
Signal setting
Y ou can change the following settings:
S i g n a l s e t t i n g
The speed at which the washing
■
machine was spun; only used if the
anticipated drying time needs to be
displayed more accurately,
The volume of the audible signal at
■
the end of the programme,
The volume of the audible button
■
signals.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
Switch the dryer on.
1.
Select the "Cottons" programme in
2.
position 1 and wait for five seconds.
Setting mode is now activated.
The symbols go out in the display panel
and the programme duration is
displayed.
Press and hold the Start button and,
1.
at the same time, turn
the programme selector clockwise
to position 2.
The spin speed is shown in
2.
the display.
Press the "Ready in" time button
3.
or the drying time button to change
the spin speed.
Turn the programme selector
4.
clockwise to position 3.
Advertisement
Table of Contents
