Table of Contents
Advertisement
M
Signal setting
Y ou can change the following settings:
S i g n a l s e t t i n g
The speed at which the washing
■
machine was spun; only used if the
anticipated drying time needs to be
displayed more accurately,
The volume of the audible signal at
■
the end of the programme,
The volume of the audible button
■
signals.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
Switch the dryer on.
1.
Select the "Cottons" programme in
2.
position 1 and wait for five seconds.
Setting mode is now activated.
The symbols go out in the display panel
and the programme duration is
displayed.
Press and hold the Start button and,
1.
at the same time, turn
the programme selector clockwise
to position 2.
The spin speed is shown in
2.
the display.
Press the "Ready in" time button
3.
or the drying time button to change
the spin speed.
Turn the programme selector
4.
clockwise to position 3.
The volume of the audible signal at
5.
the end of the programme is shown
in the display.
0 = off, 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
Press the "Ready in" time button
6.
or the drying time button to change
the volume.
Turn the programme selector
7.
clockwise to position 4.
The volume for the audible button
8.
signal is shown in the display.
0 = off, 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
Press the "Ready in" time button
9.
or the drying time button to change
the volume.
Exiting setting mode
Turn the programme selector to
the "Off" position once you have set
the required spin speed and
the volume. The settings have now
been saved.
Signal setting
en
33
Advertisement
Table of Contents
