Table of Contents
Advertisement
0 = off; 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
6th
Change the volume by selecting the
button for the Ready in time or the
button for the drying time.
7th
Turn the program selector
clockwise to position 4.
8th.
The volume appears in the display
for the Signal of the buttons.
0 = off; 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
9.
Change the volume by selecting the
button for the Ready in time or the
button for the drying time.
A notice:
Other positions can be
selected on the program selector, but
you cannot change these settings.
Exit setting mode
When you have set the spin speed and
volume you want, turn the program
selector to the off position. The settings
are now saved.
>
Sounds
i
A notice:
When drying, especially in the initial phase, arise
Sounds
Noises caused by operation from the
compressor and the pump. These are
completely normal and do not affect the
proper functioning of the device.
The compressor in the dryer makes a
humming noise from time to time. The
volume varies depending on the program
and drying progress.
The compressor is ventilated from time
to time, creating a whirring noise.
The condensed water is pumped into the
condensed water container with a pump.
This creates pumping noises.
de
Sounds
29
Advertisement
Table of Contents
