de
safety instructions
The device must not be
■
supplied via an external
switching device, such as a
timer, or connected to a
circuit.
be closed, the regular
is moderately switched on
and off by the energy
supplier. The mains plug and
■
the protective contact socket
must match
and the grounding system
must be installed according to
regulations.
The installation must have a
■
sufficiently large cable cross-
section. The power plug
must be freely accessible at
■
all times. If this is not
possible, a switch (2-pole
disconnection) must be
installed in the fixed
installation in accordance
with the regulations for the
Electrical installation.
When using a residual
■
current circuit breaker, only
one type with the symbol
z can be used. Only this
symbol guarantees
compliance with the current
regulations.
6th
:
warning
Risk of electric shock / risk of fire /
damage to property and
equipment!
Modifying or damaging the
power cord of the device can
lead to electric shock, short
circuit or fire due to
overheating.
The power cord must not be
kinked, crushed or modified
and must not come into
contact with heat sources.
:
warning
Fire hazard / property and
equipment damage!
The use of extension cables or
multiple sockets can lead to
fire due to overheating or
short circuits.
Connect the device directly to a
properly installed and earthed
socket. Do not use extension
cables, multiple plugs or
Multiple couplings.