Table of Contents
Advertisement
de
Set up and connect
Savings tips
Spin the laundry before drying. Drier
■
laundry shortens the drying time and
lowers energy consumption.
Load the dryer with maximum loads.
■
A notice:
Do not exceed the maximum
load for the programs, as this will
increase the drying time and increase
energy consumption.
Ventilate the room and keep the air
■
inlet on the dryer free so that air
exchange is guaranteed.
Clean the fluff filter after each drying.
■
A dirty fluff filter increases the drying
time and increases energy
consumption.
Power saving mode: If the
■
The dryer is not used for a longer
period of time, it switches itself off
automatically before the program
starts and after the program ends to
save energy. The display panel and
indicator lamps go out after a few
minutes and the start button flashes.
To activate the lighting, select any
button, open or close the dryer door,
turn the program selector.
12th
5
Set up and
connect
scope of delivery
L.
n
Installation and connections
dryer
■
Instructions for use and installation
■
■
Basket for woollens *
Condensation drain *
■
Set up and connect the
dryer
:
warning
Risk of death!
The dryer is operated with electricity,
there is a risk of electric shock.
Check the dryer for visible damage. A
■
damaged dryer must not be operated.
Before connecting to the power
■
supply, make sure that the electrical
voltage stated on the type plate
matches the voltage of your socket.
Only residual current circuit breakers
■
with this symbol z use.
Make sure that the power cord is not
■
kinked, pinched or come into contact
with sources of heat or sharp edges.
:
warning
Children could lock themselves in the
dryer and endanger their lives!
Do not place the dryer behind a door or a
sliding door that blocks or prevents the
dryer door from opening.
* depending on the model
Advertisement
Table of Contents
