Siemens WT45HVA1 User Manual page 33

Disruptions
Laundry does not work properly
dry or too damp.
Is the drying time too long?
Display field extinguished
and the start button flashes.
Moisture in the room
rises.
Power failure.
Unfamiliar noises
while drying.
The dryer feels cold despite
the drying process.
* depending on the model
A notice: If you cannot rectify a fault yourself by switching the dryer off and on, contact
customer service.
Cause / remedy
At the end of the program, warm laundry feels more humid than it
■
actually is. Spread out the laundry and let the heat escape. Fine-
tune the dryness level. This increases the drying time, but does not
■
increase the temperature. Your laundry will be drier
~ Page 24.
Select a program with a longer drying time or increase the drying
■
level. The temperature does not increase.
Select a timed program for drying laundry that is still damp
■
~ Page 22.
Select the time program for a small load and individual items
■
of laundry.
If you have exceeded the maximum load for the program, the
■
laundry cannot be dried properly.
Clean the moisture sensor in the drum. A fine layer of lime or
■
residues from detergents and care products can be deposited
on the sensor and impair its function. Your laundry will not dry
properly ~ Page 30.
Drying was aborted due to a power failure, a full condensation
■
container or when the maximum drying time was exceeded.
Also follow the washing tips ~ Page 21.
A notice:
The fluff filter or the EasyClean filter can be contaminated and
■
result in a longer drying time. Clean the fluff filter or the
EasyClean filter.
If the air inlet on the dryer is blocked or not freely accessible, this can
■
increase the drying time. Keep the air inlet free.
The optimal ambient temperature for drying is between 15 ° C
■
and 30 ° C. Outside this range, the drying time can increase.
Insufficient air circulation in the room can increase the drying time.
■
Ventilate the room.
No mistake. Energy saving mode is active ~ Page 11.
No mistake. Ventilate the room adequately.
The drying program is canceled. Remove the laundry and spread it
out or restart the program.
Not a mistake, see also ~ Page 29.
No mistake. The heat pump dryer dries efficiently at low
temperatures.
Disturbances, what to do?
de
33