Advertisement
Quick Links
Instructions
Colour LED -
When the tip flashes
red and vibration is felt
it means that a live
voltage field has been
detected.
Bright LED torch.
Torch on / off -
Press to switch on.
Release to switch
off.
AC Voltage
sensing tip.
Pocket clip / Battery retaining clip -
Gently lift the clip and slide to the
rear to access the battery
compartment. The unit requires 2 x
AAA batteries. Always replace with
good quality alkaline batteries.
Specification
Operating Voltage Range
Operating Frequency Range
Temperature Range
Humidity
Safety Standard
Batteries
Dimensions (mm)
Weight (no batteries)
Socket & See
Century Road
High Carr Business Park
Newcastle under Lyme
Staffordshire UK
ST5 7UG
Tel: +44 (0) 1782 567096
Fax: +44 (0) 1782 567095
Email: sales@socketandsee.co.uk
Website: www.socketandsee.co.uk
50 - 1000 VAC
50 - 60 Hz
-10°C to 50°C
80% max
Instruction Manual & Specification
BSEN 61010
2 x AAA
150 x 26 x 20
28 g
Issue1 01/19
VVD PRO
Vibrating Non Contact
AC Voltage Detector
SnS044
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Socket & See VVD PRO
Summary of Contents for Socket & See VVD PRO
- Page 1 Instructions VVD PRO Specification Operating Voltage Range 50 - 1000 VAC Vibrating Non Contact Colour LED - AC Voltage Detector Operating Frequency Range 50 - 60 Hz When the tip flashes red and vibration is felt Temperature Range -10°C to 50°C...
- Page 2 Do not use the product if there is any sign of cracks or other damage. 1.1 Equipment Markings The VVD PRO non contact voltage detector is intended Use only on electrical systems within the specified voltage to check for the presence of dangerous AC voltages.
Need help?
Do you have a question about the VVD PRO and is the answer not in the manual?
Questions and answers