1. Manuals
  2. Brands
  3. Socket & See Manuals
  4. Test Equipment
  5. SP200
  6. Instruction manual & specification

Socket & See SP200 Instruction Manual & Specification

Proving units
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
SP200, SP400
& VP400
Proving Units
Instruction Manual & Specification
VP400
SP200
SP400
SS0019V2
Sn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Socket & See SP200

Summary of Contents for Socket & See SP200

  • Page 1 SP200, SP400 & VP400 Proving Units Instruction Manual & Specification VP400 SP200 SP400 SS0019V2...

  • Page 2: Equipment Markings

    Warning - Risk of Electric Shock ! The proving unit generates up to 690V. The Socket and See SP200, SP400 and VP400 proving units are designed to be used by skilled persons in accordance with safe methods of work. If the proving unit is used in a manner not specified by Socket and See, the protection provided by it may be impaired.
  • Page 3 Multimeters and two pole voltage Indicators (VI). The SP200 and SP400 are powered by 6 x AA alkaline batteries whereas the VP400 is designed to be permanently mounted in a vehicle and operated from its 12V supply.

  • Page 4: Operation

    SS0019V2 3. Usage 3.1 Battery Installation and Status The SP200 and SP400 use 6 x LR6 AA alkaline batteries. Do Not use rechargeable batteries. The batteries are accessible by removing two screws on the rear of the units case. Ensure all testers are disconnected before accessing batteries.

  • Page 5: How To Use

    SS0019V2 3.3 How to Use 1) Prove your voltage indicator (VI) is working by placing a probe in each test point. Contact the bottom with the right hand probe then apply gentle downward pressure on the left hand probe. This will activate a micro switch, the blue power LED will illuminate and the proving unit will launch into Auto Prove Mode.

  • Page 6: Maintenance And Service

    4. Maintenance and Service If required, clean with a soft, dry cloth. Do not use abrasives or solvents. SP200 & SP400. The only user replaceable parts are the 6 x AA alkaline batteries. VP400. There are no user serviceable parts.
  • Page 7 Operating Conditions -10 to +35°C at 95% RH 50Hz Pseudo sine wave Output Frequency Maximum Output power (SP200 & SP400) 6 x LR6 AA alkaline batteries Batteries (VP400) Hard wired into vehicle 12V supply (SP200 & SP400)10 hours with average...
  • Page 8 SS0019V2 Ordering Information Item Supplier Code Socket and See SP200 SOC/SP200 Socket and See SP400 SOC/SP400 Socket and See VP400 SOC/VP400...

This manual is also suitable for:

Sp400Vp400

Table of Contents