T1 Sfp Specifications; Ethernet Routing Switch 4500 Series; Nn47205-301 (324186-A) 01.04 Standard - Nortel 4526 Installation Manual

The following table describes the 100BASE-FX SFP specifications.
100BASE-FX SFP specifications
Parameter
Maximum electrical power consumption
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
Maximum launch power
Minimum launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
T1 SFP specifications
The T1 SFP provides full-duplex Fast Ethernet to T1 connectivity. The part
number for this model is AA1419075-E6.
This device can be used with the Ethernet Routing Switch 4526FX, 4526T,
4526T-PWR, 4550T, 4550T-PWR, and 4524GT.
The following table describes the T1 SFP specifications.
Fast Ethernet to T1 remote bridge specifications
Parameter
Maximum power consumption
Dimensions
Standards
Connectors
Cabling
Copyright © 2007, Nortel Networks
.
Specifications
1.5 W
Duplex LC
•
•
•
1310 nm
10 dB
-14 dBm
-23.5 to -20 dBm
—
Specification
1 W
Height: 13.8 mm (0.54 in) Width: 15.8 mm (0.62 in)
Depth: 75.9 mm (2.99 in)
Compliant with G.703, G.775, G.823, T1.403, IEEE
802.3
RJ-48C
CAT5 with RJ-48C pin connection

Ethernet Routing Switch 4500 Series

Installation — SFPs and XFPs

NN47205-301 (324186-A) 01.04 Standard

5.1 6 December 2007
T1 SFP specifications 35
62.5 µm MMF optic cable
50 µm MMF optic cable
Up to 2 km using 500 MHz-km MMF optic
cable
33.5 dBm