24 Small form factor pluggable transceivers
Procedure job aid: locking and extractor mechanisms
Depending on the transceiver manufacturer, your SFP transceiver can have
various types of locking/extractor mechanisms.
The following figures shows a typical mechanisms used on SFP
transceivers; other locking/extractor mechanisms exist, although they are
not shown here. In the figure
mechanism" (page
bail to release the device.
Figure 1
SFP with bail lock and extraction mechanism
The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab
to release the device.
Figure 2
1000BASE-SX MT-RJ SFP extraction mechanism
The following figure shows the wrap-around latch-type extraction
mechanism. To remove the device, push the collar towards the module.
Copyright © 2007, Nortel Networks
.
Figure 1 "SFP with bail lock and extraction
24), the SFP still has the bore plug installed. Pull the
Ethernet Routing Switch 4500 Series
Installation — SFPs and XFPs
NN47205-301 (324186-A) 01.04 Standard
5.1 6 December 2007