Removing An Sfp - Nortel 4526 Installation Manual

Figure 3
Wrap-around latch-type extraction mechanism

Removing an SFP

Remove an SFP to replace it or to commission it elsewhere.
For translations of the following statements, see
caution messages" (page 14)
Procedure steps
Step
1
2
Copyright © 2007, Nortel Networks
.
WARNING
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can
injure your eyes. Never look into an optical fiber or connector port.
Always assume that fiber optic cables are connected to a light
source.
CAUTION
Risk of equipment damage
To prevent damage from electrostatic discharge, always wear an
antistatic wrist strap connected to an ESD jack.
Action
Disconnect the network fiber cable from the SFP connector.
Affix dust covers over the fiber optic bore and connector.
Ethernet Routing Switch 4500 Series
Installation — SFPs and XFPs
NN47205-301 (324186-A) 01.04 Standard
5.1 6 December 2007
"ESD and installation
and "Laser safety warnings" (page
Removing an SFP 25
16).