Programming can be done using the 2 buttons on the buzzer or via a user-friendly PC software.
Programmable parameters
STOP zone => Inner Sensors
MAXIMUM distance => Inner Sensors
STOP zone => Outer Sensors
MAXIMUM distance => Outer Sensors
(Maneuvering time period expired)
Select 51 for ON/OFF via odometer
Stationary obstacle signal (zone F1 & F2)
ON/OFF via odometer
Number of speed signal pulses/m
Automatic speed reading (see par.10.5)
*
A user friendly PC software allows more flexibility in programming the parameters. The dedicated interface also allows reading and overwriting previously configured
parameters. Please contact us for more information.
11.0 - PARAMETER CONFIGURATION TABLE
Sensitivity
Buzzer volume
Deactivation delay
Odometer
Designed and manufactured by GEMINI TECHNOLOGIES srl ‐ Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – Italy