Gasket And Closing Edge Cleaning - sangiorgio SDR8 Use And Maintenance Manual

Gently remove the fluff residue from the
condenser filter.

Gasket and closing edge cleaning

Clean the gasket on the inside of the door and the closing edge using a damp cloth and
a solution of water and soap.
Door closing edge
Bordo chiusura porta
30
Figure 19a
Once the cleaning operations have been
completed, reinsert everything in its seat,
making sure that the heat exchanger door
is correctly inserted into its housing.
Attention!
Proceed with the cleaning operations
in a delicate manner so as not to com-
promise the proper functioning of the
dryer.
The cooling fins can be sharp, do not
touch them directly.
Figure 20
Guarnizione porta
Door gasket