Electrical Connection - sangiorgio SDR8 Use And Maintenance Manual

Table of Contents

Advertisement

Electrical connection

The appliance is equipped with a power ca-
ble with schuko (EU) plug for connection to
the AC power supply ~ 230 V 50 Hz. Make
sure that the schuko (EU) plug is always
accessible in order to disconnect the ap-
pliance from the mains. The electrical sys-
tem must be made according to VDE 0100
standards. The maximum absorption of the
appliance is 10 amperes.
It is recommended never connect the ma-
chine with extension cords, multiple sock-
ets or similar to avoid overheating and
therefore a potential fire hazard. The man-
ufacturer declines all responsibility for dam-
age due to the lack or interruption of the
protective conductor. To increase safety,
the VDE institute, in the DIN VDE 0100 part
739 directive, recommends providing the
machine an automatic differential switch
(lifesaving) with tripping current 30mA
(DIN VDE 0664). If an RCD is used, check
that it is type A, compliant with DIN VDE
0664 and sensitive to pulsating currents.
The data plate provides information on the
nominal absorption and relative protection.
Compare these data with those of the elec-
trical network.
For personal safety, and the goods that sur-
round the dryer, it must be connected to an
electrical system that is equipped with an
earthing conductor appropriately checked
in accordance with the law and a differen-
tial magnetothermic switch (life-saving).
This dryer is equipped with a power cord
(A) and a plug (B).
To avoid the risk of electric shock/fire, the
cord must be plugged into a wall socket (C)
suitable for the type of plug. (B)
Do not modify the power cable and do not
use adapters or extensions (D)
If the wall socket is not available, it is the
customer's personal responsibility and ob-
ligation to have one installed by a qualified
electrician.
The appliance must not be supplied through
an external switching device, such as a tim-
er, or connected to a circuit that is regularly
switched on and off by a utility.
Figure 5
16
Attention!
This dryer requires the
grounding.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdr9

Table of Contents