Table of Contents
Advertisement
Maintenance
Filter cleaning
This tumble dryer is equipped with two fluff
filters: one inside (I) and one outside (E).
Clean both filters after each drying.
This prevents an extension of the pro-
gramme duration.
The icon
on after a specific number of
drying cycles for a cleaning the filters.
E
Open the mesh filters and clean by remov-
ing all fluff residues. Avoid using water to
clean the filters, being careful not to leave
residues inside the dryer.
Figure 14
Figure 16
I
Cleaning heat exchanger inlet
The heat exchanger is located at the bot-
tom left of the front of the dryer. To open the
door, turn the levers anticlockwise.
Gently, remove the fluff residue between
the fins of the heat exchanger (Figure 19).
If it is dirty, clean it with a brush or vacuum
cleaner. Do not apply much pressure so as
not to damage the slats.
Once the cleaning operations have been
completed, re-insert everything into its seat
making sure that the exchanger cover is
correctly inserted in its housing.
Figure 18
Figure 19a
29
Advertisement
Table of Contents
