Dryer Functions Description - sangiorgio SDR8 Use And Maintenance Manual

Table of Contents

Advertisement

Dryer functions description

1. Start/pause button
The button allows for the start of a drying
programme, after correct turning on (see
point 8). The start or pause occurs by
pressing the key.
2. Buzzer button
The dryer is supplied with a multi-melody
buzzer. The buzzer melody is associated
with the fault status, the programme se-
lection, alarms and the end of drying pro-
gramme.
The buzzer is active by default. It can be
activated or deactivated by pressing the
key
2 . The activation or deactivation
status indicated by the LED
ed. It is turned on if activated or turned off
if deactivated.
If an option is not selectable due to its in-
compatibility with a specific programme,
the incompatibility noise is emitted with a
quick flash of the icon. If an error appeared
during the drying process and it is not
possible to continue the cycle, the display
shows the error code accompanied by the
buzzer sound.
3. Drying options selection but-
ton
The button allows for the selection of a dry-
ing level. Only one drying level can be se-
lected at a time. The selection of the drying
level is made with the button 3 . Selecta-
ble states are indicated by corresponding
icons
,
22
illuminat-
e
.
One press on the key 3
next drying level by illuminating the icon.
4. Reverse agitation selection
button
The reverse agitation option can be added
to the standard programme, which changes
the direction of rotation of the drum. It aims
at reducing the formation of crease. It is ac-
tivated by pressing button 4
illuminate the corresponding icon
the display.
It is recommended for larger or longer gar-
ments. The option is performed at the end
of the drying cycle.
5. Half load selection button
Button 5
activates and deactivates the
half load function. The half load option is
used to reduce the drying time.
Activation and deactivation lights up and
turns off the corresponding icon
the display.
6. Timed drying selection
button
Timed drying programmes are programmes
in which you can decide the exact duration
of the drying programme. The duration se-
lection range is from 20 minutes to 3 hours.
Each time the button 6 is pressed, there
will be an increase of 10 minutes to the
corresponding last duration shown on the
display 10 .
will activate the
which will
on
on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdr9

Table of Contents