Call Settings - Nokia N91 User Manual

Standby mode
Active standby—Use shortcuts to applications in the standby
mode on the display. See 'Active standby mode', p. 31.
Left selection key—To assign a shortcut to the left selection
key ( ) in the standby mode, select an application from
the list.
Right selection key—To assign a shortcut to the right
selection key (
application from the list.
Active standby apps.—To select the application shortcuts
you want to appear in the active standby mode, select the
applications from the list. This setting is only available if
Active standby is on.
You can also assign shortcuts to different movements of
the joystick. Select the application for each movement
from a list. The joystick shortcuts are only available if
Active standby is off.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose
whether you want the operator logo to show or not.
Display
Brightness—You can change the brightness of the display
to be lighter or darker.
Power saver time-out—The power saver is activated when
the time-out period is over.
Light time-out—Select a time-out after which the backlight
of the display is switched off.
96
) in the standby mode, select an

Call settings

Send my caller ID (network service)—You can set your phone
number to be displayed to (Yes) or hidden from (No) the
person to whom you are calling, or the value may be set by
your network operator or service provider when you make
a subscription (Set by network).
Call waiting (network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select
the network to activate call waiting,
network to deactivate call waiting, or
check if the function is active or not.
Reject call with SMS—Select
to a caller informing why you could not answer the call.
See 'Answer or decline a call', p. 34.
Message text—Write a text to be sent in a text message
when you decline a call.
Automatic redial—Select On, and your device makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Activate to request
Cancel to request the
Check status to
Yes to send a text message