Cd-Rom; Your Device As A Modem; Connection Manager; Data Connections - Nokia N91 User Manual

Always create the connection from the PC to synchronize
with your device.
For further information on how to install Nokia PC Suite
(compatible with Windows 2000 and Windows XP), see the
User Guide for Nokia PC Suite and the Nokia PC Suite help
in the 'Install' section on the CD-ROM supplied in the sales
package.

CD-ROM

The CD-ROM should launch after you have inserted it into
the CD-ROM drive of a compatible PC. If not, proceed as
follows: Open Windows Explorer, right-click the CD-ROM
drive where you inserted the CD-ROM, and select Autoplay.

Your device as a modem

You can use your device as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using a Bluetooth connection or a data cable. Detailed
installation instructions can be found in the User Guide for
Nokia PC Suite in Modem options on the CD-ROM.
Tip! When using Nokia PC Suite for the first time,
to connect your device to a compatible PC and to
use Nokia PC Suite, use the Get Connected wizard
available in Nokia PC Suite. See the CD-ROM
supplied in the sales package.
90

Connection manager

You may have multiple data connections active at the
same time when you are using your device in GSM and
UMTS networks. Press , and select
To view the status of data connections or end connections
in GSM and UMTS network and wireless LAN, select
data conn.. To search for wireless LANs available within
range, select Availab. WLAN.

Data connections

In the active connections view, you can see the open data
connections: data calls ( ), packet data connections (
or ), and wireless LAN connections (
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select
all open connections, select
To view the details of a connection, select
Details. The details shown depend on the connection type.
Connect. > Conn mgr
Act.
).
Options > Disconnect. To close
Options > Disconnect all.
Options >