Write Text; Traditional Text Input - Nokia N91 User Manual

To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select
Service command in the main view of Messag..
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select
Cell broadcast. In the main view you can see the status
of a topic, a topic number, name, and whether it has
been flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.

Write text

ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.

Traditional text input

The indicator is shown on the top right of the display
when you are writing text using traditional text input.
• Press a number key ( — ) repeatedly until the desired
character appears. There are more characters available
Options > for a number key than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press
and hold
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or quickly
Options >
move the joystick to the right to end the time-out
period), and enter the letter.
• To erase a character, press
to clear more than one character.
• The most common punctuation marks are available
under . Press
punctuation mark.
Press
joystick to move through the list, and press
to select a character.
• To insert a space, press . To move the cursor
to the next line, press
• To switch between the different character modes,
press
.
. Press and hold
repeatedly to reach the desired
to open a list of special characters. Use the
three times.
.
Select
51